User`s manual

314
DWS-1008 User’s Manual
D-Link Systems, Inc.
Conguring AAA for Network Users
This command applies the access list named acl-101 to each user at EXAMPLE.
4. To display the ACL, type the following command:
DWS-1008# show security acl info acl-101
set security acl ip acl-101 (hits #0 0)
----------------------------------------------------
1. permit IP source IP 192.168.1.1 0.0.0.255 destination IP any enable-hits
5. Create a Mobility Prole called tulip by typing the following commands:
DWS-1008# set mobility-prole name tulip port 2,4-6
success: change accepted.
DWS-1008# set mobility-prole mode enable
success: change accepted.
DWS-1008# show mobility-prole
Mobility Profiles
Name Ports
=========================
tulip
AP 2
AP 4
AP 5
AP 6
6. To assign Mobility Prole tulip to all users at EXAMPLE, type the following command
for each EXAMPLE\ user:
DWS-1008# set user EXAMPLE\username attr mobility-prole tulip
Users at EXAMPLE are now restricted to ports 2 and 4 through 6, as specied in the
tulip Mobility Prole conguration.
7. Use the show aaa command to verify your conguration. Type the following
command:
DWS-1008# show aaa
Default Values
authport=1812 acctport=1813 timeout=5 acct-timeout=5
retrans=3 deadtime=0 key=(null) author-pass=(null)
Radius Servers
Server Addr Ports T/o Tries Dead State
-------------------------------------------------------------------