User`s manual
231
DWS-1008 User’s Manual
D-Link Systems, Inc.
Conguring and Managing IGMP Snooping
DWS-1008 User’s Manual
Displaying Multicast Receivers
To display information about the multicast receivers only without also displaying all the other
multicast information, use the following command:
show igmp receiver-table [vlan vlan-id]
[group group-ip-addr/mask-length]
Use the group parameter to display receivers for a specic group or set of groups. For
example, to display receivers for multicast groups 237.255.255.1 through 237.255.255.255,
in all VLANs, type the following command:
DWS-1008# show igmp receiver-table group 237.255.255.0/24
VLAN: red
Session Port Receiver-IP Receiver-MAC TTL
----------------------------------------------------------------------------------------
237.255.255.2 2 10.10.20.19 00:02:04:06:09:0d 112
237.255.255.119 3 10.10.30.31 00:02:04:06:01:0b 112
VLAN: green
Session Port Receiver-IP Receiver-MAC TTL
----------------------------------------------------------------------------------------
237.255.255.17 5 10.10.40.41 00:02:06:08:02:0c 12
237.255.255.255 6 10.10.60.61 00:05:09:0c:0a:01 111