User`s manual

DWS-1008 User’s Manual

D-Link Systems, Inc.

Conﬁguration (continued)

Conguration

Conguration Overview

To congure a DWS-1008 switch for basic service, perform the following tasks, in this

order:

1. Congure an enable password. (See “Conguring an Enable Password” on page 19.)

2. Congure time and date parameters. (See “Conguring the Time and Date” on page 20.)

3. Congure IP connectivity. (See “Conguring IP Connectivity” on page 22.)

4. Specify the country of operation. (See “Specifying the Country of Operation” on page

25.)

5. Specify a system IP address. (See “Specifying a System IP Address” on page 26.)

6. Set the port types for ports connected to wired or wireless authentication users. (See

“Conguring for Authenticating Users” on page 28.)

7 Congure authentication for network users. (See “Conguring User Authentication” on

page 44.)

8. Verify the changes and save them to the conguration le. (See “Displaying and Saving

the Conguration” on page 50.)