User`s manual

223
DWS-1008 User’s Manual
D-Link Systems, Inc.
Conguring and Managing STP
223D-Link Systems, Inc.
DWS-1008# show port status
Port Name Admin Oper Config Actual Type Media
=============================================================
1 up up auto 100/full network 10/100BaseTx
2 down down auto network
3 down down auto network
4 up down auto network 10/100BaseTx
5 up down auto network 10/100BaseTx
6 up down auto network 10/100BaseTx
7 up down auto network 10/100BaseTx
8 up down auto network 10/100BaseTx
2. Congure a backbone VLAN and verify the conguration change. Type the following
commands:
DWS-1008# set vlan 10 name backbone port 2-3
success: change accepted.
DWS-1008# show vlan cong
Admin VLAN Tunl Port
VLAN Name Status State Affin Port Tag State
--------------------------------------------------------------------------------------------------
1 default Up Up 5
1 none Up
10 backbone Up Down 5
2 none Down
3 none Down
3. Enable STP on the backbone VLAN and verify the change. Type the following
commands:
DWS-1008# set spantree enable vlan backbone
success: change accepted.
DWS-1008# show spantree vlan 10
VLAN 10
Spanning tree mode PVST+
Spanning tree type IEEE
Spanning tree enabled
Designated Root 00-0b-0e-00-04-0c
Designated Root Priority 32768
Designated Root Path Cost 0
We are the root
Root Max Age 20 sec Hello Time 2 sec Forward Delay 15 sec
Bridge ID MAC ADDR 00-0b-0e-00-04-0c