User`s manual

221
DWS-1008 User’s Manual
D-Link Systems, Inc.
Conguring and Managing STP
221D-Link Systems, Inc.
To display STP statistics for port 1, type the following command:
DWS-1008# show spantree statistics 1
BPDU related parameters
Port 1 VLAN 1
spanning tree enabled for VLAN = 1
port spanning tree enabled
state Forwarding
port_id 0x8015
port_number 0x15
path cost 0x4
message age (port/VLAN) 0(20)
designated_root 00-0b-0e-00-04-30
designated cost 0x0
designated_bridge 00-0b-0e-00-04-30
designated_port 38
top_change_ack FALSE
config_pending FALSE
port_inconsistency none
Port based information statistics
config BPDU’s xmitted(port/VLAN) 0 (1)
config BPDU’s received(port/VLAN) 21825 (43649)
tcn BPDU’s xmitted(port/VLAN) 0 (0)
tcn BPDU’s received(port/VLAN) 2 (2)
forward transition count (port/VLAN) 1 (1)
scp failure count 0
root inc trans count (port/VLAN) 1 (1)
inhibit loopguard FALSE
loop inc trans count 0 (0)
Status of Port Timers
forward delay timer INACTIVE
forward delay timer value 15
message age timer ACTIVE
message age timer value 0
topology change timer INACTIVE
topology change timer value 0
hold timer INACTIVE
hold timer value 0
delay root port timer INACTIVE
delay root port timer value 0
delay root port timer restarted is FALSE
VLAN based information & statistics
spanning tree type ieee
spanning tree multicast address 01-00-0c-cc-cc-cd
bridge priority 32768
bridge MAC address 00-0b-0e-12-34-56
bridge hello time 2