User`s manual

173
DWS-1008 User’s Manual
D-Link Systems, Inc.
Conguring DWL-8220AP Access Points
To display radio prole information for the default radio prole, type the following command:
DWS-1008# show radio-prole default
Beacon Interval: 100 DTIM Interval: 1
Max Tx Lifetime: 2000 Max Rx Lifetime: 2000
RTS Threshold: 2346 Frag Threshold: 2346
Short Retry Limit: 5 Long Retry Limit: 5
Long Preamble: NO Allow 802.11g clients only: NO
Tune Channel: no Tune Power: no
Tune Channel Interval: 3600 Tune Power Interval: 600
Power Backoff Timer: 10 Channel Holddown: 300
Countermeasures: none Active-Scan: yes
WMM enabled: yes
Service profiles: default-dot1x, default-clear
Displaying AP Status Information
To display status information including link state and DWS-1008 status, use the following
commands:
show ap status [terse] | [port-list | all [radio {1 | 2}]]
show dap status [terse] | [dap-num | all [radio {1 | 2}]]
The terse option displays a brief line of essential status information for each directly connected
AP or Distributed AP.
The all option displays information for all directly attached access points and all Distributed
AP access points congured on the switch.
The following command displays the status of a Distributed AP access point:
DWS-1008# show dap status 1
Dap: 1, IP-addr: 10.2.30.5 (vlan ‘vlan-corp’), AP model: DWL-8220AP,
manufacturer: D-Link, name: DAP01
fingerprint: b4:f9:2a:52:37:58:f4:d0:10:75:43:2f:45:c9:52:c3
====================================================
State: operational (not encrypted)
CPU info: IBM:PPC speed=266666664 Hz version=405GPr
id=0x29c15335347f1919 ram=33554432
s/n=0333703027 hw_rev=A3
Uptime: 18 hours, 36 minutes, 27 seconds
Radio 1 type: 802.11g, state: configure succeed [Enabled] (802.11b protect)
operational channel: 1 operational power: 14
base mac: 00:0b:0e:00:d2:c0
bssid1: 00:0b:0e:00:d2:c0, ssid: public
bssid2: 00:0b:0e:00:d2:c2, ssid: employee-net
bssid3: 00:0b:0e:00:d2:c4, ssid: mycorp-tkip