User`s manual

171
DWS-1008 User’s Manual
D-Link Systems, Inc.
Conguring DWL-8220AP Access Points
To display conguration information for a Distributed AP access point congured on connection
1, type the following command:
DWS-1008# show dap cong 1
Dap 1: serial-id: 12345678, AP model: DWL-8220AP, bias: high, name: DAP01
fingerprint: b4:f9:2a:52:37:58:f4:d0:10:75:43:2f:45:c9:52:c3
boot-download-enable: YES
load balancing group: none
Radio 1: type: 802.11g, mode: disabled, channel: 6
tx pwr: 1, profile: default
auto-tune max-power: default, min-client-rate: 5.5, max-retransmissions: 10
Radio 2: type: 802.11a, mode: disabled, channel: 36
tx pwr: 1, profile: default
auto-tune max-power: default, min-client-rate: 24, max-retransmissions: 10
Displaying a List of Distributed APs
To display a list of the Distributed APs congured on switches on your network, use the
following command:
show dap global [dap-num | serial-id serial-ID]
This command lists the System IP addresses of all the switches on which each Distributed
AP is congured, and lists the bias for the AP on each switch. For each Distributed AP that
is congured on the switch on which you use the command, the connection number is also
listed.
Displaying a List of Distributed APs that Are Not Congured
To display a list on Distributed APs that are not congured, use the following command:
show dap uncongured
The following command displays information for two Distributed APs that are not
congured:
DWS-1008# show dap uncongured
Total number of entries: 2
Serial Id Model IP Address Port Vlan
-----------------------------------------------------------------------------
0333001287 DWL-8220AP 10.3.8.54 3 default
0333001285 DWL-8220AP 10.3.8.57 5 vlan-eng