User`s manual

125
DWS-1008 User’s Manual
D-Link Systems, Inc.
Conguring SNMP
DWS-1008 set snmp notify prole snmpprof_rfdetect send
RFDetectSpoofedSsidAPTraps
success: change accepted.
DWS-1008 set snmp notify prole snmpprof_rfdetect send
RFDetectUnAuthorizedAPTraps
success: change accepted.
DWS-1008 set snmp notify prole snmpprof_rfdetect send
RFDetectUnAuthorizedOuiTraps
success: change accepted.
DWS-1008 set snmp notify prole snmpprof_rfdetect send
RFDetectUnAuthorizedSsidTraps
success: change accepted.
Conguring a Notication Target
A notication target is a remote device to which MSS sends SNMP notications.
You can congure the MSS SNMP engine to send conrmed notications (informs) or
unconrmed notications (traps). Some of the command options differ depending on the
SNMP version and the type of notication you specify. You can congure up to 10 notication
targets.
To congure a notication target for informs from SNMPv3, use the following command:
set snmp notify target target-num ip-addr[:udp-port-number]
usm inform user username
snmp-engine-id {ip | hex hex-string}
[prole profile-name]
[security {unsecured | authenticated | encrypted}]
[retries num]
[timeout num]
To congure a notication target for traps from SNMPv3, use the following command:
set snmp notify target target-num ip-addr[:udp-port-number]
usm trap user username
[prole profile-name]
[security {unsecured | authenticated | encrypted}]