User`s manual

104
DWS-1008 User’s Manual
D-Link Systems, Inc.
Conguring and Managing IP Interfaces and Services
Clearing the Time Zone
To clear the time zone, use the following command:
clear timezone
Conguring the Summertime Period
The summertime period offsets the system time +1 hour and returns it to standard time for
daylight savings time or a similar summertime period that you set.
Note: Congure summertime before you set the time and date. Otherwise, summertime’s
adjustment of the time will make the time incorrect, if the date is within the summertime
period.
To congure the summertime period, use the following command:
set summertime summer-name [start week weekday month hour min end week weekday
month hour min]
The summer-name can be up to 32 alphanumeric characters long, with no spaces. The start
and end dates and times are optional. If you do not specify a start and end time, MSS
implements the time change starting at 2:00 a.m. on the rst Sunday in April and ending at
2:00 a.m. on the last Sunday in October, according to the North American standard.
To set the summertime period to PDT (Pacic Daylight Time) and use the default start and
end dates and times, type the following command:
DWS-1008# set summertime PDT
success: change accepted.
Displaying the Summertime Period
To display the summertime period, use the following command:
show summertime
For example, to display the summertime period, type the following command:
DWS-1008# show summertime
Summertime is enabled, and set to ‘PDT’.
Start : Sun Apr 04 2004, 02:00:00
End : Sun Oct 31 2004, 02:00:00
Offset : 60 minutes
Recurring : yes, starting at 2:00 am of first Sunday of April
and ending at 2:00 am on last Sunday of October.