User`s guide

DWL-AB650 Wireless Multimode Cardbus Adapter

Option Tab

Under General Setting, check “Auto launch when Windows starts up” so

that AirPro automatically launches when Windows starts up. Check “Use IP

Setting in Profile” to enable the IP settings made under IP Config in the

Wireless Network Properties screen. If checked current IP settings will be

saved. If unchecked (and previously checked), previous IP settings will be

restored. If “Use Windows IP settings” is checked, IP settings from “Network

and Dial-up connections” will be used. Check “Disable Radio” to disconnect

the network connection without removing the WLAN cardbus adapter.

Under Advanced Settings, check “Enable Turbo Mode” to enable turbo

mode. Turbo mode can then take effect if you are using a turbo mode

enabled Access Point. Set the Encryption Type to Auto, WEP, or Advanced

Encryption Standard (AES). The Radio Frequency has been preset to

802.11a-5GHz.

Note: Currently, the Turbo Mode is only available in the United States.

The About Tab gives the utility version number of the AirPro utility.