D-Link AirPro DWL-AB650 5/2.4 GHz Wireless Multimode Cardbus Adapter User’s Guide Rev.
Contents Package Contents ....................................................3 Introduction ..............................................................4 Wireless Basics........................................................7 Getting Started ....................................................... 11 Installation ..............................................................19 Using the Select Country Utility ..............................35 Using the Configuration Utility for Windows 2000, 98, or ME...
DWL-AB650 Wireless Multimode Cardbus Adapter Package Contents Contents of Package: • D-Link AirPro DWL-AB650 5/2.4 GHz Wireless Cardbus Adapter • Manual and Drivers on CD • Quick Installation Guide (printed) If any of the above items are missing, please contact your reseller. System Requirements: • A laptop computer with an available 32-bit Cardbus slot • Windows XP, Windows 2000, Windows ME, or Windows 98 SE • At least 32 MB of memory and a 300 MHz processor or higher • An 802.
DWL-AB650 Wireless Multimode Cardbus Adapter Introduction The D-Link AirPro DWL-AB650 Wireless Cardbus Adapter is an advanced IEEE 802.11a and 802.11b compatible, high performance, wireless adapter that supports data transfer speeds of up to 54 Mbps in 802.11a mode and up to 11 Mbps in 802.11b mode. Transfer modes of up to 108 Mbps can be achieved in D-Link’s proprietary Turbo mode (this feature is currently only available in USA).
DWL-AB650 Wireless Multimode Cardbus Adapter Product Features • Compatible with IEEE 802.11a high data-rate standard to provide wireless communication at rates up to 54 Mbps, and up to 108 Mbps in a proprietary turbo mode • Compatible with IEEE 802.11b standard to provide wireless Ethernet data rates of up to11Mbps data rate • Operation at dual 2.4 ~ 2.5GHz and 5.15 ~ 5.
DWL-AB650 Wireless Multimode Cardbus Adapter Network Mode LED Activity Network Activity Both LEDs flash in unison Searching for a Network Connection Both LEDs flash alternately Associated with the Network, but No Activity Both LEDs flicker dimly Power Save Mode (Power-up or Reset) POWER LED – slow rate blink Adapter is disabled Only the POWER LED flashes 6 ACTIVITY POWER
DWL-AB650 Wireless Multimode Cardbus Adapter Wireless Basics D-Link AirPro wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home or business. Strictly adhering to the IEEE 802.11a and 802.11b standards, the D-Link AirPro wireless family of products will allow you to access the data you want, when and where you want it. No longer will you be limited to one location or forced to run new wiring through your home or office.
DWL-AB650 Wireless Multimode Cardbus Adapter locations where installation of wiring may be impractical. Furthermore, IEEE standardization facilitates interoperability of all WLAN devices that conform to the 802.11a or 802.11b sets of standards. Installation Speed and Simplicity - Installing a wireless LAN system can be fast and easy and can eliminate the need to pull cable through walls and ceilings. Installation Flexibility - Wireless technology allows the network to go where wires cannot go.
DWL-AB650 Wireless Multimode Cardbus Adapter Division Multiplexing) technology. OFDM works by splitting the radio signal into multiple smaller sub-signals that are then transmitted simultaneously at different frequencies to the receiver. OFDM reduces the amount of crosstalk (interference) in signal transmissions. D-Link AirPro products will automatically sense the best possible connection speed to ensure the greatest speed and range possible with the technology.
DWL-AB650 Wireless Multimode Cardbus Adapter 5. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise. For the average residence, range should not be a problem. If you experience low or no signal strength in areas of your home that you wish to access, consider positioning the Access Point in a location directly between the computers with wireless adapters that will be connected.
DWL-AB650 Wireless Multimode Cardbus Adapter Getting Started To begin, select the type of wireless network you will be building. We will discuss the following types of networks in this section: 1. A Home Internet Network with A Residential Gateway/Router 2. A Home Internet Network with Multiple IP Addresses 3. An Ad Hoc Network 4. An Ad Hoc Network with Internet Sharing Please select, from the four types of networks described above, the type of network that is appropriate for your needs.
DWL-AB650 Wireless Multimode Cardbus Adapter DHCP stands for Dynamic Host Configuration Protocol. It is a protocol for assigning dynamic IP addresses “automatically.” With a DHCP-capable gateway, there is no need to manually assign an IP address. (Requirements: A Residential Gateway/Router connected with an Ethernet (CAT5) cable to an 802.11a Access Point such as the DWL-5000AP or an 802.11b Access Point or another computer with an 802.11a or 802.11b WLAN adapter installed).
DWL-AB650 Wireless Multimode Cardbus Adapter this manual entitled: Checking the Installation of the Drivers for the Wireless Adapter. 5. By default, the wireless adapter is set to obtain a Dynamic IP Address. If you are having difficulty connecting, check to make sure that the IP Address of the wireless adapter is within the IP address range of your network. Please refer to the Networking Basics section in this manual entitled: Checking The IP Address. 6. Learn to share printers and files.
DWL-AB650 Wireless Multimode Cardbus Adapter Please note that this type of installation requires that your ISP (Internet Service Provider) provides you a static IP address for each computer and the Access Point on your network. Please refer to the manual that came with your Access Point to determine its configuration. Please follow these steps to complete the installation: 1. Connect the Wireless Access Point (the D-Link AirPro DWL5000AP is shown in the example) to a Broadband connection. 2.
DWL-AB650 Wireless Multimode Cardbus Adapter 4. Set the Static IP Address of the wireless adapters. Please refer to the Networking Basics section in this manual entitled: Assigning an IP Address. Note: The IP Address for all computers must be in the same IP Address range, and the Subnet Mask must be the same for all the computers on the network. For example: If the first computer is assigned an IP Address of 192.168.0.2 with a Subnet Mask of 255.255.255.
DWL-AB650 Wireless Multimode Cardbus Adapter DWL-A520 Wireless PCI Adapters into your desktops - please refer to the Quick Installation Guide for further instructions.) 2. Set the Static IP Address of the wireless adapters. Please refer to the Networking Basics section in this manual entitled: Assigning an IP Address. Note: The IP Address for all computers must be in the same IP Address range, and the Subnet Mask must be the same for all computers on your network.
DWL-AB650 Wireless Multimode Cardbus Adapter DFE-530TX To share an Internet connection with Internet Sharing software you will need to purchase Internet Sharing software or use the Internet Connection Sharing (ICS) utility provided with Windows XP, Windows 2000, Windows ME or Windows 98SE. Please follow your software documentation to properly configure the Internet sharing software after you install your wireless networking adapters.
DWL-AB650 Wireless Multimode Cardbus Adapter 1. Install the D-Link AirPro DWL-AB650 Wireless Cardbus Adapter (please refer to the Quick Install Guide.) 2. Check the Device Manager to confirm that your adapter is installed correctly. Please refer to the Networking Basics section in this manual entitled: Checking the Installation of the Drivers for the Wireless Adapter. 3. Install your Internet Sharing Software 4. If required by the ICS software, set the static IP Address for the wireless adapter.
DWL-AB650 Wireless Multimode Cardbus Adapter Installation This section shows you how to install the AirPro Utility if you are using the operating systems Windows 2000, 98, ME, or NT. Follow the instructions given below on how to install the hardware (DWL-AB650 Cardbus Adapter) and then the software (AirPro driver and utility). For those using Windows XP, the installation procedure will be the same until the utility installation. Windows XP has a built in utility for wireless devices.
DWL-AB650 Wireless Multimode Cardbus Adapter 2. Installing the Driver Installing the software involves two steps. The first is to install the Driver and the second is to install the Configuration Utility. • When the DWL-AB650 has been inserted into a 32-bit Cardbus slot, the Found New Hardware Wizard screen appears. • Continue with the installation and the screen below should appear. Click on Yes to proceed with the installation.
DWL-AB650 Wireless Multimode Cardbus Adapter Click Yes • Insert the Driver CD into the CD-ROM drive. If you have not inserted the Driver CD into the CD-Rom a prompt such as the one below will appear. Click OK. • Otherwise installation will continue with the following screen and come to completion.
DWL-AB650 Wireless Multimode Cardbus Adapter 3. Installing the Configuration Utility Look for the file named “Setup.exe” on the installation CD-ROM. Doubleclick on it to start the installation for the configuration utility. Setup.exe l When this screen appears click Next. Click Next.
DWL-AB650 Wireless Multimode Cardbus Adapter l To install to the folder C:\Program Files\D-Link\AirPro Utility click Next. Otherwise click on Browse to choose an alternate location.
DWL-AB650 Wireless Multimode Cardbus Adapter l Click Next to proceed with the utility installation.
DWL-AB650 Wireless Multimode Cardbus Adapter l A screen alerting you that all backup files have been removed will appear as below: l After AirPro Utility has been successfully installed, InstallShield Wizard will prompt you to restart your computer. Select “Yes, I want to restart my computer now,” and click on Finish.
DWL-AB650 Wireless Multimode Cardbus Adapter Click Finish 26
DWL-AB650 Wireless Multimode Cardbus Adapter l After you have restarted your computer the following screen will appear. Click Next to continue. Click Next l Select the appropriate settings in the screen below to connect to a wireless network (network name to connect and WEP settings). Click Next to put settings into effect.
DWL-AB650 Wireless Multimode Cardbus Adapter Click Next l You have completed the installation of the DWL-AB650. l Now click Finish to end the setup procedures and start using your new wireless card.
DWL-AB650 Wireless Multimode Cardbus Adapter 3. Uninstalling the Configuration Utility To uninstall the configuration utility simply click Uninstall ProgramsàD-Link AirProàUninstall. To uninstall the driver, right-click on My Computer. Left-click on Properties to bring up the System Properties screen.
DWL-AB650 Wireless Multimode Cardbus Adapter Click on the Hardware tab.
DWL-AB650 Wireless Multimode Cardbus Adapter Click on Device Manager.
DWL-AB650 Wireless Multimode Cardbus Adapter Click on Network adapters.
DWL-AB650 Wireless Multimode Cardbus Adapter Right click on the “D-Link AirPro DWL-AB650 Wireless Cardbus Adapter” icon.
DWL-AB650 Wireless Multimode Cardbus Adapter Click on Uninstall. You will then receive a Confirm Device Removal screen. Click OK to complete the uninstall procedure.
DWL-AB650 Wireless Multimode Cardbus Adapter Using the Select Country Utility An additional utility is provided with your DWL-AB650 Cardbus Adapter to set the card’s country location. Different countries around the world regulate the frequencies that your DWL-AB650 Cardbus Adapter uses to communicate with an AP and to transfer data. The Select Country utility allows you to tell the card which country you are in, and the card will then select the frequencies appropriate to that country.
DWL-AB650 Wireless Multimode Cardbus Adapter The Select Country utility will display the following screen for confirmation of the change: Click OK Click OK to make the change.
DWL-AB650 Wireless Multimode Cardbus Adapter Using the Configuration Utility for Windows 2000, 98, or ME If you are using Windows 2000, 98, ME, or NT, the Configuration Utility program for the DWL-AB650 is called AirPro. Once you have installed AirPro (the configuration utility), you can read this section of the manual to find out how to monitor and configure your DWL-AB650 adapter using AirPro. Screenshots for this section have been taken in Windows 2000.
DWL-AB650 Wireless Multimode Cardbus Adapter On the left side of the screen are Available WLANs which you may connect to by first selecting the WLAN (it will appear highlighted) and then clicking on Add. When you do so a screen like the one below will pop up: In the Wireless Network Properties screen you may change the name of the WLAN. You may also enter wireless network encryption keys by checking Network Authentication (Shared mode) or Enable Data encryption.
DWL-AB650 Wireless Multimode Cardbus Adapter On the Configuration Tab click on Refresh to call up all the available WLANs. On the right side of the screen is a list of Preferred WLANs. These are WLANs that have already been added to the wireless network. Click New to rename the WLAN and reset its properties. You will see the Wireless Network Properties screen as displayed previously when you click New.
DWL-AB650 Wireless Multimode Cardbus Adapter Status Tab Information given under Connected State are the Connection status (connected or disconnected), Network name , Network type (infrastructure or adhoc), Wep Status (enabled or disabled), Speed (of the wireless connection), and Signal Strength (a colored bar shows the intensity of the radio signals in the network). Under Hardware Information the Media Access Control (MAC) address of the hardware (WLAN cardbus adapter) is given.
DWL-AB650 Wireless Multimode Cardbus Adapter Option Tab Under General Setting, check “Auto launch when Windows starts up” so that AirPro automatically launches when Windows starts up. Check “Use IP Setting in Profile” to enable the IP settings made under IP Config in the Wireless Network Properties screen. If checked current IP settings will be saved. If unchecked (and previously checked), previous IP settings will be restored.
DWL-AB650 Wireless Multimode Cardbus Adapter About Tab 42
DWL-AB650 Wireless Multimode Cardbus Adapter Using the Configuration Utility for Windows XP The Air Pro Configuration Utility supports Windows XP; however, Windows XP has its own utility for wireless devices. In order to use the AirPro Configuration Utility as described in the last section you must disable the utility built into Windows XP by unchecking the box below.
DWL-AB650 Wireless Multimode Cardbus Adapter If you leave the “Use Windows to configure my wireless network settings” box checked, you will use the Windows XP utility for wireless devices. The following demonstrates how to manage wireless network connections with the Windows XP built-in utility. Creating a connection Right click on “My Network Places” to obtain a drop-down menu with Properties listed.
DWL-AB650 Wireless Multimode Cardbus Adapter Left-click on Properties to obtain the Network Connections screen. Right-click on the “Wireless Network Connection” icon to produce another drop-down menu with item Properties.
DWL-AB650 Wireless Multimode Cardbus Adapter Left-click on Properties to bring up the screen below.
DWL-AB650 Wireless Multimode Cardbus Adapter 47
DWL-AB650 Wireless Multimode Cardbus Adapter Click on the Wireless Networks tab. Click on the Access Point under Available Networks with which you wish to establish a connection.
DWL-AB650 Wireless Multimode Cardbus Adapter Click on Configure to establish a connection with the chosen access point “dwl6000ap.” A screen such as the following called Wireless Network Properties will then appear. Enter the appropriate settings on the screen below and click OK.
DWL-AB650 Wireless Multimode Cardbus Adapter 50
DWL-AB650 Wireless Multimode Cardbus Adapter The access point “dwl6000ap” has been added to the network under Preferred networks. Click OK.
DWL-AB650 Wireless Multimode Cardbus Adapter The Network Connections window now shows the wireless network connection as “Enabled”.
DWL-AB650 Wireless Multimode Cardbus Adapter Networking Basics Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work, using Microsoft Windows XP. Note: Please refer to websites such as http://www.homenethelp.com and http://www.microsoft.com/windows2000 for information about networking computers using Windows 2000, ME or 98.
DWL-AB650 Wireless Multimode Cardbus Adapter Click Next. In the following window, select the best description of your computer. If your computer connects to the internet through a gateway/router, select the second option as shown.
DWL-AB650 Wireless Multimode Cardbus Adapter Click Next. Enter a Computer description and a Computer name (optional.) Click Next. Enter a Workgroup name. All computers on your network should have the same Workgroup name .
DWL-AB650 Wireless Multimode Cardbus Adapter Click Next. Please wait while the wizard applies the changes. When the changes are complete, click Next.
DWL-AB650 Wireless Multimode Cardbus Adapter Please wait while the wizard configures the computer. This may take a few minutes. In the window below, select the best option. In this example, “Create a Network Setup Disk” has been selected. You will run this disk on each of the computers on your network. Click Next.
DWL-AB650 Wireless Multimode Cardbus Adapter Insert a disk into the Floppy Disk Drive, in this case drive “A:” Format the disk if you wish, and click Next. Please wait while the wizard copies the files.
DWL-AB650 Wireless Multimode Cardbus Adapter Please read the information under Here’s how in the screen below. After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. To continue, click Next.
DWL-AB650 Wireless Multimode Cardbus Adapter Please read the information on this screen, then click Finish to complete the Network Setup Wizard. The new settings will take effect when you restart the computer. Click Yes to restart the computer. You have completed configuring this computer. Next, you will need to run the Network Setup Disk on all the other computers on your network. After running the Network Setup Disk on all your computers, your new wireless network will be ready to use.
DWL-AB650 Wireless Multimode Cardbus Adapter Networking Basics Naming your Computer To name your computer, please follow these directions: In Windows XP: • Click START (in the lower left corner of the screen) . • Right-click on My Computer. • Select Properties and Click. • Select the Computer Name Tab in the System Properties window. You may enter a Computer description if you wish, this field is optional.
DWL-AB650 Wireless Multimode Cardbus Adapter • In this window, enter the Computer name. • Select Workgroup and enter the name of the Workgroup. • All computers on your network must have the same Workgroup name. • Click OK. Checking the Installation of the Drivers for the Wireless Adapter • Go to Start. • Right-click on My Computer. • Click Properties.
DWL-AB650 Wireless Multimode Cardbus Adapter • Select the Hardware Tab. • Click Device Manager.
DWL-AB650 Wireless Multimode Cardbus Adapter • Look under Device Status to check that the device is working properly. • Click OK. Networking Basics Checking the IP Address in Windows XP • Right-click on the networking icon in the task bar. • Click on Status. The following window will display • Click the Support tab.
DWL-AB650 Wireless Multimode Cardbus Adapter • Click Close.
DWL-AB650 Wireless Multimode Cardbus Adapter Networking Basics Assigning a Static IP Address Note: Residential Gateways/Broadband Routers will automatically assign IP Addresses to the computers on the network, using DHCP (Dynamic Host Configuration Protocol) technology. If you are using a DHCP-capable Gateway/Router you will not need to assign Static IP Addresses.
DWL-AB650 Wireless Multimode Cardbus Adapter • Double-click on Network Connections. • Right-click on Local Area Connections. • Double-click Properties.
DWL-AB650 Wireless Multimode Cardbus Adapter • Highlight Internet Protocol (TCP/IP). • Click Properties. • Select Use the following IP address in the Internet Protocol (TCP/IP) Properties window. • Input your IP address and subnet mask. (The IP Addresses on your network must be within the same range. For example, if one computer has an IP Address of 192.168.0.2, the other computers should have IP Addresses that are sequential, like 192.168.0.3 and 192.168.0.4.
DWL-AB650 Wireless Multimode Cardbus Adapter • Click OK. You have completed the assignment of a Static IP Address. (You do not need to assign a Static IP Address if you have a DHCP-capable Gateway/Router.) Networking Basics Adding and Sharing Printers in Windows XP After you have run the Network Setup Wizard on all the computers in your network (please see the Network Setup Wizard section at the beginning of Networking Basics,) you can use the Add Printer Wizard to add or share a printer on your network.
DWL-AB650 Wireless Multimode Cardbus Adapter share a network printer (a printer connected to your network through a Gateway/Router,) use the Add Printer Wizard. Please follow the directions below: First, make sure that you have run the Network Setup Wizard on all of the computers on your network. We will show you 3 ways to use the Add Printer Wizard 1. Adding a local printer 2. Sharing an network printer 3.
DWL-AB650 Wireless Multimode Cardbus Adapter • Click on printer. Add a • Click Next.
DWL-AB650 Wireless Multimode Cardbus Adapter • Select Local printer attached to this computer. • (Deselect Automatically detect and install my Plug and Play printer if it has been selected.) • Click Next. • Select Use the following port: • From the pull-down menu select the correct port for your printer. (Most computers use the LPT1: port, as shown in the illustration.) • Click Next. • Select and highlight the correct driver for your printer. • Click Next.
DWL-AB650 Wireless Multimode Cardbus Adapter • At this screen, you can change the name of the printer (optional.) • Click Next. • Select Yes to print a test page. A successful printing will confirm that you have chosen the correct driver. • Click Next. This screen gives you information about your printer. • Click Finish.
DWL-AB650 Wireless Multimode Cardbus Adapter When the printed, test page has • Click OK. • Go to Start> Printers and Faxes. A successful installation will display the printer icon as shown at right. You have successfully added a local printer.
DWL-AB650 Wireless Multimode Cardbus Adapter Networking Basics Sharing a network printer After you have run the Network Setup Wizard on all the computers on your network, you can run the Add Printer Wizard on all the computers on your network. Please follow these directions to use the Add Printer Wizard to share a printer on your network: • Go to Start> Printers and Faxes. • Click on Add a Printer.
DWL-AB650 Wireless Multimode Cardbus Adapter • Click Next. • Select Browse for a printer • Click Next. • Select the printer you would like to share. • Click Next.
DWL-AB650 Wireless Multimode Cardbus Adapter • Click Finish. To check for proper installation: • Go to Start> Printers and Faxes.
DWL-AB650 Wireless Multimode Cardbus Adapter The printer icon will appear at right, indicating proper installation. You have completed adding the printer. To share this printer on your network: • Remember the printer name • Run the Add Printer Wizard on all the computers on your network. • Make sure you have already run the Network Setup Wizard on all the network computers. After you run the Add Printer Wizard on all the computers in the network, you can share the printer.
DWL-AB650 Wireless Multimode Cardbus Adapter • • Go to Start> Printers and Faxes. Click on Add a Printer. The screen to the right will display. • Click Next. • Select A Network Printer. • Click Next.
DWL-AB650 Wireless Multimode Cardbus Adapter • Select Create a new port. • From the pull-down menu, select Standard TCP/IP Port, as shown. • Click Next. • Please read the instructions on this screen. • Click Next. • Enter the Printer IP Address and the Port Name, as shown. • Click Next.
DWL-AB650 Wireless Multimode Cardbus Adapter • In this screen, select Custom. • Click Settings. • Enter the Port Name and the Printer Name or IP Address. • Select LPR. • Enter a Queue Name. If there is more than one port on the print server, you must name the Queue . • Click OK.
DWL-AB650 Wireless Multimode Cardbus Adapter • This screen will show you information about your printer. • Click Finish. • Select the printer you are adding from the list of Printers. • Insert the printer driver disk that came with your printer. • Click Have Disk. If the printer driver is already installed, • Select Keep existing driver. • Click Next.
DWL-AB650 Wireless Multimode Cardbus Adapter • You can rename your printer if you choose. It is optional. Please remember the name of your printer. You will need this information when you use the Add Printer Wizard on the other computers on your network. • Click Next. • Select Yes, to print a test page. • Click Next. This screen will display information about your printer. • Click Finish to complete the addition of the printer.
DWL-AB650 Wireless Multimode Cardbus Adapter Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DWL-AB650 Wireless Cardbus Adapter. Read the following descriptions if you are having problems. 1. Checking the Installation of the Drivers for the Wireless Adapter • Go to Start. • Right-click on My Computer. • Click Properties.
DWL-AB650 Wireless Multimode Cardbus Adapter • Select the Hardware Tab. • Click Device Manager. • Click on Network Adapters. • Right-click on D-Link Air Pro DWL-AB650 Wireless Cardbus Adapter. • Select Properties to check that the drivers are installed properly.
DWL-AB650 Wireless Multimode Cardbus Adapter • Look under Device Status to check that the device is working properly. D-Link AirPro DWL-AB650 Wireless Cardbus Adapter • Click OK. 2. The computer does not recognize the DWL-AB650 Wireless Cardbus Adapter. • Make sure that the DWL-AB650 Wireless Cardbus Adapter is properly seated in the computer’s cardbus slot. • If Windows does not detect the hardware upon insertion of the adapter, make sure to completely remove drivers that were previously installed.
DWL-AB650 Wireless Multimode Cardbus Adapter 3. The DWL-AB650 Wireless Cardbus Adapter does not work properly after the driver is installed. • Restart the computer. (In some cases, it will be necessary to restart the computer after installing the drivers.
DWL-AB650 Wireless Multimode Cardbus Adapter • Check that the IP Address assigned to the wireless adapter is within the same IP Address range as the access point and gateway. (For example: if one computer has an IP Address of 192.168.0.2, the other computers should have IP Addresses that are sequential, like 192.168.0.3 and 192.168.0.4. The subnet mask must be the same for all the computers on the network.
DWL-AB650 Wireless Multimode Cardbus Adapter Technical Specifications Standards • • IEEE 802.11a (up to 54 Mbps) IEEE 802.11b (up to 11 Mbps) Adapter Type • Cardbus PC Card Type II Supported OS • Windows XP • Windows 2000 • Windows ME • Windows 98SE Frequency Range • 5.150-5.350 GHz (IEEE 802.11a) • Data Rates • • Ÿ Ÿ Ÿ 5.15 ~ 5.35GHz and 5.725 ~ 5.825GHz for US and Canada 5.15 ~ 5.25GHz for Japan 5.15 ~ 5.35GHz and 5.47 ~ 5.725GHz for Europe 2.400-2.497 GHz (IEEE 802.
DWL-AB650 Wireless Multimode Cardbus Adapter • • DSSS CCK Data Security • 64, 128, 154-bit WEP (Wired Equivalent Privacy) Encryption Media Access Control • CSMA/CA with ACK Diagnostic LED • Power • Link Current Consumption • Sleep mode - <40mW • Transmit mode - 1650mW • Receive mode – 1250mW Operating Voltage • 3.
DWL-AB650 Wireless Multimode Cardbus Adapter Temperature • Operating: 0ºC to 60ºC (32ºF to 140ºF) • Storing: -20ºC to 85ºC (-4ºF to 185ºF) Humidity: • 5%-95%, non-condensing Emissions: • • FCC part 15b UL1950-3 91
DWL-AB650 Wireless Multimode Cardbus Adapter Limited Warranty and Registration Wichtige Sicherheitshinweise 1. Bitte lesen Sie sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den spätern Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Vervenden Sie keine Flüssig- oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. 4.
DWL-AB650 Wireless Multimode Cardbus Adapter Limited Warranty Hardware: D-Link warrants its hardware products to be free from defects in workmanship and materials, under normal use and service, for the following periods measured from date of purchase from D-Link or its Authorized Reseller: Product Type Complete products Spare parts and spare kits Warranty Period One year 90 days The one-year period of warranty on complete products applies on condition that the product's Registration Card is filled out an
DWL-AB650 Wireless Multimode Cardbus Adapter D-Link warrants that its software products will perform in substantial conformance with the applicable product documentation provided by D-Link with such software product, for a period of ninety (90) days from the date of purchase from D-Link or its Authorized Reseller. D-Link warrants the magnetic media, on which D-Link provides its software product, against failure during the same warranty period.
DWL-AB650 Wireless Multimode Cardbus Adapter LIMITATION OF WARRANTIES IF THE D-LINK PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, AT D-LINK'S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
DWL-AB650 Wireless Multimode Cardbus Adapter FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
DWL-AB650 Wireless Multimode Cardbus Adapter AVERTISSEMENT AUX UTILISATEURS La décision N° 01-480 en date du 23 mai 2001 prise par l’Autorité de Régulation des Télécommunications (ART) autorise l’utilisation d’une partie de la bande de fréquences 2400-2483,5 MHz pour les réseaux locaux radioéléctriques (RLAN) Au niveau national, seule la bande 2446,5-2483,5 MHz est autorisée pour des produits ayant une puissance limitée à 100 mW Cette bande de fréquences correspond aux canaux 10,11,12 et 13.
DWL-AB650 Wireless Multimode Cardbus Adapter Offices Australia D-Link Australasia Unit 16, 390 Eastern Valley Way, Roseville, NSW 2069 Australia TEL: 61-2-9417-7100 FAX: 61-2-9417-1077 TOLL FREE (Australia): 1800-177100 TOLL FREE (New Zealand): 0800-900900 URL: www.dlink.com.au E-MAIL: support@dlink.com.au & info@dlink.com.au Level 1, 434 St.
DWL-AB650 Wireless Multimode Cardbus Adapter Germany D-Link Central Europe/D-Link Deutschland GmbH India D-Link India Schwalbacher Strasse 74, D-65760 Eschborn, Germany TEL: 49-6196-77990 FAX: 49-6196-7799300 URL: www.dlink.de BBS: 49-(0) 6192-971199 (analog) BBS: 49-(0) 6192-971198 (ISDN) INFO: 00800-7250-0000 (toll free) HELP: 00800-7250-4000 (toll free) REPAIR: 00800-7250-8000 E-MAIL: info@dlink.de Plot No.5, Kurla-Bandra Complex Rd., Off Cst Rd.
DWL-AB650 Wireless Multimode Cardbus Adapter Sweden D-Link Sweden Taiwan D-Link Taiwan P. O. Box 15036, S-167 15 Bromma, Sweden TEL: 46-(0) 8-564-61900 FAX: 46-(0) 8-564-61901 E-MAIL: info@dlink.se URL: www.dlink.se 2F, No. 119 Pao-Chung Rd, Hsin-Tien, Taipei, Taiwan TEL: 886-2-2910-2626 FAX: 886-2-2910-1515 URL: www.dlinktw.com.tw E-MAIL: dssqa@tsc.dlinktw.com.tw Turkey D-Link Middle East U.A.E. D-Link Middle East U.K. D-Link Europe U.S.A. D-Link U.S.A. Deniz Bilgisayar, Buyukdere Cad.
