Setup guide

Only users, which are members of groups with reboot privileges are permitted to reboot the router.
Reboot can be called from scripts, in which case it does not prompt for confirmation.
Example
[admin@Wandy] > system reboot
Reboot, yes? [y/N]: y
system will reboot shortly
[admin@Wandy] >
Shutdown
Command name: /system shutdown
Description
Before turning the power off for the router, the system should be brought to halt. The shutdown
process sends termination signal to all running processes, unmounts the file systems, and halts the
router.
For most systems, it is necessary to wait approximately 30 seconds for a safe power down.
Notes
Only users, which are members of groups with reboot privileges are permitted to shutdown the
router.
Shutdown can be called from scripts, in which case it does not prompt for confirmation.
Example
[admin@Wandy] > system shutdown
Shutdown, yes? [y/N]: y
system will shutdown promptly
[admin@Wandy] >
Configuration Reset
Description
The command clears all configuration of the router and sets it to the default including the login
name and password ('admin' and no password). After the reset command the router is rebooted.
Example
[admin@Wandy] > system reset
Dangerous! Reset anyway? [y/N]: n
action cancelled
[admin@Wandy] >
Router Identity