Setup guide

14 IDE 1
[admin@Wandy] >
IO Port Usage Monitor
Command name: /system resource io print
Description
IO usage shows which IO (Input/Output) ports are currently used by hardware.
Example
[admin@Wandy] > system resource io print
PORT-RANGE OWNER
0x20-0x3F APIC
0x40-0x5F timer
0x60-0x6F keyboard
0x80-0x8F DMA
0xA0-0xBF APIC
0xC0-0xDF DMA
0xF0-0xFF FPU
0x1F0-0x1F7 IDE 1
0x2F8-0x2FF serial port
0x3C0-0x3DF VGA
0x3F6-0x3F6 IDE 1
0x3F8-0x3FF serial port
0xCF8-0xCFF [PCI conf1]
0x4000-0x40FF [PCI CardBus #03]
0x4400-0x44FF [PCI CardBus #03]
0x4800-0x48FF [PCI CardBus #04]
0x4C00-0x4CFF [PCI CardBus #04]
0x5000-0x500F [Intel Corp. 82801BA/BAM SMBus]
0xC000-0xC0FF [Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+]
0xC000-0xC0FF [8139too]
0xC400-0xC407 [Cologne Chip Designs GmbH ISDN network controller [HFC-PCI]
0xC800-0xC87F [Cyclades Corporation PC300/TE (1 port)]
0xF000-0xF00F [Intel Corp. 82801BA IDE U100]
[admin@Wandy] >
USB Port Information
Command name: /system resource usb print
Description
Shows all USB ports available for the router.
Property Description
device (read-only: text) - number of device
vendor (read-only: text) - vendor name of the USB device
name (read-only: text) - name of the USB port
speed (read-only: integer) - bandwidth speed at which the port works