Setup guide

is running, and select a specific interface:
[admin@Wandy] tool sniffer> stop
[admin@Wandy] tool sniffer> set interface=bridge1
[admin@Wandy] tool sniffer> start
[admin@Wandy] tool sniffer> print
interface: bridge1
only-headers: no
memory-limit: 10
file-name:
file-limit: 10
streaming-enabled: no
streaming-server: 0.0.0.0
filter-stream: yes
filter-protocol: ip-only
filter-address1: 0.0.0.0/0:0-65535
filter-address2: 0.0.0.0/0:0-65535
running: yes
[admin@Wandy] tool sniffer>
Now you have the source and destination MAC Addresses:
[admin@Wandy] tool sniffer packet> print detail
0 time=0 src-mac-address=00:0C:42:03:02:C7 dst-mac-address=00:30:4F:08:3A:E7
interface=bridge1 src-address=10.5.8.104:1125
dst-address=10.1.0.172:3987 (winbox-tls) protocol=ip ip-protocol=tcp
size=146 ip-packet-size=146 ip-header-size=20 tos=0 identification=5088
fragment-offset=0 ttl=126
1 time=0 src-mac-address=00:30:4F:08:3A:E7 dst-mac-address=00:0C:42:03:02:C7
interface=bridge1 src-address=10.1.0.172:3987 (winbox-tls)
dst-address=10.5.8.104:1125 protocol=ip ip-protocol=tcp size=253
ip-packet-size=253 ip-header-size=20 tos=0 identification=41744
fragment-offset=0 ttl=64
2 time=0.071 src-mac-address=00:0C:42:03:02:C7
dst-mac-address=00:30:4F:08:3A:E7 interface=bridge1
src-address=10.5.8.104:1125 dst-address=10.1.0.172:3987 (winbox-tls)
protocol=ip ip-protocol=tcp size=40 ip-packet-size=40 ip-header-size=20
tos=0 identification=5089 fragment-offset=0 ttl=126
3 time=0.071 src-mac-address=00:30:4F:08:3A:E7
dst-mac-address=00:0C:42:03:02:C7 interface=bridge1
src-address=10.1.0.172:3987 (winbox-tls) dst-address=10.5.8.104:1125
protocol=ip ip-protocol=tcp size=213 ip-packet-size=213 ip-header-size=20
tos=0 identification=41745 fragment-offset=0 ttl=64
-- [Q quit|D dump|down]
Traceroute
Document revision 1.2 (Fri Mar 05 09:48:20 GMT 2004)
This document applies to Wandy RouterOS V2.8
Table of Contents