Setup guide
file save command is used.
Example
In the following example the packet sniffer will be started and after some time - stopped:
[admin@Wandy] tool sniffer> start
[admin@Wandy] tool sniffer> stop
Below the sniffed packets will be saved in the file named test:
[admin@Wandy] tool sniffer> save file-name=test
[admin@Wandy] tool sniffer> /file print
# NAME TYPE SIZE CREATION-TIME
0 test unknown 1350 apr/07/2003 16:01:52
[admin@Wandy] tool sniffer>
Sniffed Packets
tool sniffer packet
Description
The submenu allows to see the list of sniffed packets.
Property Description
data (read-only: text) - specified data inclusion in packets
dst-address (read-only: IP address) - IP destination address
fragment-offset (read-only: integer) - IP fragment offset
identification (read-only: integer) - IP identification
ip-header-size (read-only: integer) - the size of IP header
ip-packet-size (read-only: integer) - the size of IP packet
ip-protocol (ip | icmp | igmp | ggp | ipencap | st | tcp | egp | pup | udp | hmp | xns-idp | rdp | iso-tp4 |
xtp | ddp | idrp-cmtp | gre | esp | ah | rspf | vmtp | ospf | ipip | encap) - the name/number of IP
protocol
• ip - Internet Protocol
• icmp - Internet Control Message Protocol
• igmp - Internet Group Management Protocol
• ggp - Gateway-Gateway Protocol
• ipencap - IP Encapsulated in IP
• st - st datagram mode
• tcp - Transmission Control Protocol
• egp - Exterior Gateway Protocol
• pup - Parc Universal packet Protocol
• udp - User Datagram Protocol
• hmp - Host Monitoring Protocol
• xns-idp - Xerox ns idp
• rdp - Reliable Datagram Protocol
• iso-tp4 - ISO Transport Protocol class 4
• xtp - Xpress Transfer Protocol
• ddp - Datagram Delivery Protocol