Setup guide

Example

To enable MAC telnet server on ether1 interface only:

[admin@Wandy] tool mac-server> print

Flags: X - disabled

# INTERFACE

0 all

[admin@Wandy] tool mac-server> remove 0

[admin@Wandy] tool mac-server> add interface=ether1 disabled=no

[admin@Wandy] tool mac-server> print

Flags: X - disabled

# INTERFACE

0 ether1

[admin@Wandy] tool mac-server>

Monitoring Active Session List

tool mac-server sessions

Property Description

interface (read-only: name) - interface the client is connected to

src-address (read-only: MAC address) - client's MAC address

uptime (read-only: time) - how long the client is connected to the server

MAC Telnet Client

Command name: /tool mac-telnet

Example

[admin@Wandy] tool> mac-telnet "00:40:63:C1:23:C4"

Password:

Trying 00:40:63:C1:23:C4...

Connected to 00:40:63:C1:23:C4

MMM MMM KKK TTTTTTTTTTT KKK

MMMM MMMM KKK TTTTTTTTTTT KKK

MMM MMMM MMM III KKK KKK RRRRRR OOOOOO TTT III KKK KKK

MMM MM MMM III KKKKK RRR RRR OOO OOO TTT III KKKKK

MMM MMM III KKK KKK RRRRRR OOO OOO TTT III KKK KKK

MMM MMM III KKK KKK RRR RRR OOOOOO TTT III KKK KKK

Terminal linux detected, using multiline input mode

[admin@10.5.7.1] >