Setup guide

If DNS service is configured, it is possible to ping by DNS address. To do it from Winbox, you

should resolve DNS address first, pressing right mouse button over it address and choosing Lookup

Address.

Packet size may not be greater than the interface's mtu. If 'pinging' by MAC address, minimal

packet size iz 50.

Only neighbour Wandy RouterOS routers with MAC-ping feature enabled can be 'pinged' by

MAC address.

Example

An example of Ping command:

[admin@Wandy] > ping 159.148.60.2 count=5 interval=40ms size=64

159.148.60.2 64 byte pong: ttl=247 time=32 ms

159.148.60.2 64 byte pong: ttl=247 time=30 ms

159.148.60.2 64 byte pong: ttl=247 time=40 ms

159.148.60.2 pong timeout

159.148.60.2 64 byte pong: ttl=247 time=28 ms

5 packets transmitted, 4 packets received, 20% packet loss

round-trip min/avg/max = 28/32.5/40 ms

[admin@Wandy] >

MAC Ping Server

tool mac-server ping

Property Description

enabled (yes | no; default: yes) - whether MAC pings to this router are allowed

Example

To disable MAC pings:

[admin@Wandy] tool mac-server ping> set enabled=no

[admin@Wandy] tool mac-server ping> print

enabled: no

[admin@Wandy] tool mac-server ping>

Bandwidth Control

Document revision 1.3 (Mon Mar 15 15:43:47 GMT 2004)

This document applies to Wandy RouterOS V2.8

Table of Contents