Setup guide

Local IP Traffic Accounting Table
ip accounting snapshot
Description
When a snapshot is made for data collection, the accounting table is cleared and new IP pairs and
traffic data are added. The more frequently traffic data is collected, the less likelihood that the IP
pairs thereshold limit will be reached.
Property Description
src-address (read-only: IP address) - source IP address
dst-address (read-only: IP address) - destination IP address
packets (read-only: integer) - total number of packets, matched by this entry
bytes (read-only: integer) - total number of bytes, matched by this entry
src-user (read-only: text) - sender's name (if aplicable)
dst-user (read-only: text) - recipient's name (if aplicable)
Notes
Usernames are shown only if the users are connected to the router via a P2P tunnel or are
authenticated by HotSpot.
Before the first snapshot is taken, the table is empty.
Example
To take a new snapshot:
[admin@Wandy] ip accounting snapshot> take
[admin@Wandy] ip accounting snapshot> print
# SRC-ADDRESS DST-ADDRESS PACKETS BYTES SRC-USER DST-USER
0 192.168.0.2 159.148.172.197 474 19130
1 192.168.0.2 10.0.0.4 3 120
2 192.168.0.2 192.150.20.254 32 3142
3 192.150.20.254 192.168.0.2 26 2857
4 10.0.0.4 192.168.0.2 2 117
5 159.148.147.196 192.168.0.2 2 136
6 192.168.0.2 159.148.147.196 1 40
7 159.148.172.197 192.168.0.2 835 1192962
[admin@Wandy] ip accounting snapshot>
Web Access to the Local IP Traffic Accounting Table
ip accounting web-access
Description
The web report make it possible to use the standard Unix/Linux tool wget to collect the traffic
data and save it to a file or to use Wandy shareware Traffic Counter to display the table. If the
web report is enabled and the web is viewed, the snapshot will be made when connection is