Setup guide

Monitoring Active Router Users
user active print
Property Description
when (read-only: date) - log-in time
name (read-only: name) - user name
address (read-only: IP address) - IP address from which the user is accessing the router
• 0.0.0.0 - the user is logged in locally
via (read-only: console | telnet | ssh | web) - user's access method
Example
[admin@Wandy] user> active print
Flags: R - radius
# WHEN NAME ADDRESS VIA
0 feb/21/2003 17:48:21 admin 0.0.0.0 console
1 feb/24/2003 22:14:48 admin 10.0.0.144 ssh
2 mar/02/2003 23:36:34 admin 10.0.0.144 web
[admin@Wandy] user>
Router User Remote AAA
user aaa
Property Description
use-radius (yes | no; default: no) - specifies whether a user database on a RADIUS server should
be consulted
accounting (yes | no; default: yes) - specifies whether to use RADIUS accounting
interim-update (time; default: 0s) - Interim-Update interval
default-group (name; default: read) - user group used by default for users authenticated via
RADIUS server
Notes
The RADIUS user database is consulted only if the required username is not found in local user
database
Example
To enable RADIUS AAA:
[admin@Wandy] user aaa> set use-radius=yes
[admin@Wandy] user aaa> print
use-radius: yes
accounting: yes
interim-update: 0s
default-group: read
[admin@Wandy] user aaa>