Installation guide

This document will guide you through the

basic installation process for your new

D-Link Unied Wireless Access Point.

Building Networks for People

DWL-3600AP

Documentation also available

on CD and via the D-Link

Website

Quick Installation Guide

802.11n Unied Access Point

Quick Installation Guide

PAGE 1
Building Networks for People Quick Installation Guide 802.11n Unified Access Point This document will guide you through the basic installation process for your new D-Link Unified Wireless Access Point.
PAGE 2
ENGLISH About This Guide This installation guide provides basic instructions for installing the DWL-3600AP Wireless Access Point on your network. For additional information about how to use the Access Point, please see the User Manual, which is available on the CD included in this package or from the D-Link support website.
PAGE 3
Mounting Options Power on the access point You can mount a DWL-3600AP access point on any of the following types of surfaces: To power on the DWL-3600AP, you can use ONE of the following methods: 1. Connect the supplied power adapter OR 2. Plug one end of an Ethernet cable into the LAN port of the DWL-3600AP and the other end into a port on a PoE switch.
PAGE 4
ENGLISH Solid Wall or Ceiling Installation 1. Place the plastic wall mounting ring on a wall or ceiling. 6. To attach the access point to the mounting ring, first locate the right side of the access point that has a small lock symbol on it, and make sure to line up this side with the side of the mounting ring that has Open - Close written on it. 2. Mark the points where you will insert the screws. Take out the mounting ring. 3. Drill holes in the marked points and insert the plastic wall anchors. 4.