Specifications

56
Using the AP Manager
Device Configuration
Click on this button to access the configuration
properties of the selected device(s).
The device conguration window allows you to congure settings but does not actually apply the
settings to the device unless you click the
Apply button. You can also save and load conguration
les from this window. When you load a conguration le, you must click Apply if you want the
settings to be applied to the selected device(s).
The save button allows you to save a conguration le of the selected
device settings. Only settings that have a check mark next to them
are saved. You cannot save a conguration le if you selected more
than one device in the device list.
The Exit button will close the device conguration window. Any
settings that haven’t been applied will be lost.
The open button is used to load a previously saved conguration le.
After opening a conguration le, you must click the Apply button to
save the settings to the selected device(s).
To save settings to the device, you must click the Apply button. Only
settings that have a check mark next to them will be applied.
Refresh will revert to the actual device settings of the selected
device(s).
The Clear Checks button deselects all congurable options. This
feature is useful if you only want to change a few settings. Deselect
all items and only check the items that you want to modify.
The Check All button will select all congurable options. Any setting
that has a check mark next to it is applied to the device or saved to
the conguration le.
You can congure a single device by highlighting one device in the list, or you can congure
multiple devices by highlighting multiple devices before clicking on the Device Conguration icon
pictured above. The examples in this section show single device conguration. When you select
multiple devices for conguration the procedure will be similar.