Specifications
30
Security:
The Multi-SSIDs security can be WPA/WPA2-Enterprise or
WPA-Auto-Enterprise only when the Primary SSID’s security is
at the same security level. Also, they must connect to the same
RADIUS server.
VLAN ID:
If you congure enable Guest access and congure Internal and
Guest networks on VLANs, this eld will be enabled.
Provide a number between 1 and 4094 for the Internal VLAN.
This will cause the access point to send DHCP requests with the
VLAN tag. The switch and the DHCP server must support VLAN
IEEE802.1Q frames. The access point must be able to reach the
DHCP server.
Check with the Administrator regarding the VLAN and DHCP
congurations.
Select
HEX or ASCII.
Select
64-bit, 128-bit, or 152-bit.
Select the 1st key all the way through the 4th key, to be set as the
active key. Enter key here.
Key Type:
Key Size:
Key:
When Primary SSID is set to any of
the following security levels:
Multi-SSID can use any of these
security levels:
None
Open System (WEP)
Shared Key (WEP)
WPA-Personal
WPA2-Personal
WPA-Auto-Personal
None
Open System (WEP)
Shared Key (WEP)
WPA-Personal
WPA2-Personal
WPA-Auto-Personal
WPA-Enterprise
WPA2-Enterprise
WPA-Auto-Enterprise
None
Open System (WEP)
Shared Key (WEP)
WPA-Personal
WPA2-Personal
WPA-Auto-Personal
WPA-Enterprise
WPA2-Enterprise
WPA-Auto-Enterprise