User`s manual
27
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Home > Advanced Settings > Performance
DTIM:
*”Maximum wireless signal rate based on IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions
and environmental factors, including volume of network traffic, building materials and construction, and network overhead lower
actual data throughout rate.”
(Delivery Traffic Indication Message) - Select a setting between 1 and
255. 1 is the default setting. DTIM is a countdown informing clients of
the next window for listening to broadcast and multicast messages.
Wireless Band:
Frequency:
Channel:
Data Rate*:
Beacon
Interval:
IEEE 802.11g.
The frequency reflects the choice of the wireless channel. When
IEEE 802.11g is chosen the frequency is 2.437GHz for channel 6.
The default channel for IEEE 802.11g is 6.
The Data Rates are Auto 1Mbps, 2Mbps, 5.5Mbps, 11Mbps, 6Mbps,
9Mbps, 12Mbps, 18Mbps, 24Mbps, 36Mbps, 48Mbps, 54Mbps.
Beacons are packets sent by an access point to synchronize a
network. Specify a beacon interval value. The default (100) is
recommended.