User`s manual
22
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Auto Channel
Scan:
Remote AP MAC
Address:
Select Enable or Disable. (Enable this feature to auto-select the
channel for best wireless performance.)
Enter the MAC addresses of the APs in your network that will serve
as bridges to wirelessly connect multiple networks.
Authentication:
Open System
Shared Key
Open System/Shared Key
WPA-Personal
WPA2-Personal
WPA-Auto-Personal
Select Open System to communicate the key across the network.
Select Shared Key to limit communication to only those devices
that share the same WEP settings.
Select Open System/Shared Key to allow either form of data
encryption.
Select WPA-Personal, WPA2-Personal, or WPA-Auto-Personal to
secure your network using a password and dynamic key changes.
(No RADIUS Server required).
Using the Configuration Menu
WDS Site
Enabling this feature automatically selects the channel that will
provide the best wireless performance. This feature is not supported
in WDS with AP mode.
Channel:
6 is the default channel. All devices on the network must share the
same channel. (Note: The wireless adapters will automatically scan
and match the wireless setting.)
Cipher Type:
Group Key Update Interval:
Select the interval during which the group key will be valid. The
default value of 1800 is recommended.
When you select WPA-Personal, WPA2-Personal, or
WPA-Auto-Personal you must select AES or AUTO from the
pull-down menu.
PassPhrase:
When you select WPA-Personal, please enter a PassPhrase in
the corresponding field.