User`s manual

DWL-3200AP User’s Manual

D-Link Systems, Inc.

Home > Basic Settings > Wireless > WPA-Enterprise,

WPA2-Enterprise, & WPA-Auto-Enterprise

Using the Conﬁguration Menu

Access Point is selected from the pull-down menu.

Service Set Identiﬁer (SSID) is the name designated for a speciﬁc

wireless local area network (WLAN). The SSID’s factory default

setting is dlink. The SSID can be easily changed to connect to an

existing wireless network or to establish a new wireless network. The

SSID can be up to 32 characters and is case-sensitive.

Enable or Disable SSID broadcast. Enabling this feature broadcasts

the SSID across the network.

Auto Channel Scan is set by default. All devices on the network

must share the same channel. To change the channel, uncheck Auto

Channel Scan. (Note: The wireless adapters will automatically scan

and match the wireless setting.)

Mode:

SSID:

SSID Broadcast:

Channel:

Wireless Band:

IEEE 802.11g