Specifications

52
Appendix 1:
Telnet Configuration
The AP is designed to operate as shipped from the factory without any special set-
up. However, it has many options and parameters that can be changed if users
have special requirements. Most of the management functions can be accessed
using TCP/IP protocol; it can also be configured by Telnet/Console.
Configure the AP using a Telnet session on a wired LAN attached computer. To
use the Telnet session, you can simply open a Telnet window using the IP address
that has been assigned to the AP.
1. Go to Start >Run; open the Run dialog box.
Enter telnet 192.168.0.50 (the default terminal type of Telnet is VT100; the default
Ethernet IP Address of the AP is 192.168.0.50; the default wireless IP Address is
192.168.1.50).
Click OK.
telnet 192.168.0.50