Specifications

Using the Configuration Utility (continued)

Tools > System

The current system settings can be saved as a file onto the local hard drive. The saved

file or any other saved setting file can be loaded back on the DWL-1700AP. To reload a

system settings file, click on Browse to browse the local hard drive and locate the

system file to be used. You may also reset the Wireless Access Point back to factory

settings by clicking on Default.

Click Backup to save the current settings to the local Hard Drive

Click Browse to find the settings, then click Restore

Save Settings to

Local Hard Drive-

Load Settings from

Local Hard Drive-

Reset Device-

Click Reboot to Restart the DWL-1700AP

Save Current Config-

Click Save to save the current configuration

Reset to Default-

Click Default to reset to factory default settings