Installation guide

Using the Conﬁguration Menu

Advanced > 802.1x

Disabled is the default selection for 802.1x protocol. Select Enabled to enable it.

Encryption Key: Select the key length, either 64 bits or 128 bits.

Lifetime: Select 5, 15, 30 minutes, or 1or 8 hours, or 1 day for the authentication

period. After this period expires, a new key will automatically be generated.

Radius Server 1

IP: Enter the IP Address of the Radius Server

Port: Enter the port number that your Radius Server uses for

Authentication. The default setting of 1812 is the port setting for many

Radius Servers

Shared Secret: Enter the Shared Secret. The shared secret must be the

same as the shared secret on your radius server.

Radius Server 2: Optional. If you have a second radius server, you will input the

same information as shown above.