Installation guide

15
Using the Configuration Menu
DHCP Server: Select Enabled or Disabled. Disabled is the default setting. If you
want to use the Access Point as a DHCP server to automatically assign Dynamic IP
Addresses on the network, you will select Enabled.
Starting IP Address: If you have enabled the DHCP server function, enter the
starting point of the IP Address range for your network
Ending IP Address: Enter the ending IP Address of your IP Address range, if you
have enabled the DHCP function of the Access Point
Lease Time: Choose the length of time at which the DHCP function of the DWL-
1000AP+ automatically regenerates the IP Addresses to the devices in your network
DHCP Client Table: Lists the devices on your network that are receiving dynamic
IP Addresses from the Access Point
Home > DHCP