Installation Instructions
Technical Specications
/ COVR-X1860
Technical Specications
/ DWA-X1850
Specifications are subject to change without notice. © 2021 D-Link. All Rights Reserved. D-Link and the D-Link logo are trademarks
or registered trademarks of D-Link. All other third-party marks mentioned herein may be trademarks of their respective owners.
D-Link European Headquarters | D-Link (Europe) Ltd., First Floor, Artemis Building, Odyssey Business Park,
West End Road, South Ruislip HA4 6QE, United Kingdom.
General
Wireless Encryption WPA2™, and WPA3™ (Wi-Fi Protected Access)
Standards IEEE 802.11ax
IEEE 802.11n
IEEE 802.11a
IEEE 802.11ac
Antenna Type Integrated antenna
Requirements
Operating System Windows 10 32 & 64-bit driver support
Interface Available USB port Supports USB 3.2 Gen 1 (USB 3.0) standard
Physical
Dimensions (L x W x H) 95.5 x 30 x 12.7 mm
Weight 23.6 g
Power Power consumption:
Standby mode - 154 mA
Operating mode - 464 mA
Operating voltage: 5.0 V DC ± 10%
Temperature Operating: 0 to 40° C (32 to 104° F) Storage: -20 to 75˚ C (-4 to 167° F)
Humidity Operating: 10% to 90% (non-condensing) Storage: 5% to 95% (non-condensing)
Certifications FCC Class B
CE
IC
1
Maximum wireless signal rate derived from IEEE standard 802.11ax/ac/n/g/b specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trac, building
materials and construction, and network overhead, lower actual data throughput rate. Environmental factors may adversely aect wireless signal range.
2
Using a USB 1.1 or USB 2.0 port will aect device performance. USB 3.2 Gen 1 (USB 3.0) port or higher recommended.