User manual

 First, go to the top left cursor (seen above) and use the arrow keys to position

it in the top left corner of the screen. You should be able to see the green

arrow-head and two thin green lines in the corner.

 Next, switch to the bottom right cursor and adjust it so you see the arrow-

head and the two thin lines in that corner.

 Now select the subtitle positioning bar and move it up or down to the

position on the screen were you would like to see the subtitles presented.

 Finally, move to the center square (aspect ratio) and adjust it to ensure box is

square(use a flexible ruler if required) and the circle round.

 That's it! Your screen is now calibrated. Hit Esc or Back until you reach the

Home Screen.

Setting Screen Resolution

Since Boxee has been designed as a home media center, it starts in full screen mode

the first time you use it. You can change this at any time by changing the resolution

for Boxee on your display from the menu at Settings > Look & Feel > Screen >

Resolution. If you have one display attached you will be given two options: Full

Screen and Windowed. Select the option you would like to use, then select Test &

apply resolution and OK.