User manual

25D-Link DVX-2000MS User Manual
Section 2 - Installation
Starting Microsoft Response Point Administrator
Click Connect
Use the following steps to start Microsoft
®
Response Point
™
Administrator and log on to the DVX-2000MS Base Unit.
In Windows
®
XP, click Start > All Programs > and then click Microsoft Response Point Administrator to start the
program.
Select the DVX-2000MS base unit you just installed, and click Connect.
Note: A few seconds may pass. If you don’t see the DVX-2000MS base unit listed, it’s likely that the base unit or the
computer on which Administrator program is running, is not connected properly to the LAN. Make sure all cables and
power cords are connected. Another potential problem is that the DVX-2000MS base unit is not turned on.
Note: If a Security Alert dialog box comes up, click Unblock.