User Manual

DVG-G5402SP User’s Manual ADVANCED
D-Link Systems, Inc. 49
2-2-3-9 Hot Line
ADVANCED → VoIP → HOT LINE
Enable: Check the box to enable the Hot Line function for a dedicated line; if the line is not being used,
disable them (Pause Function) will avoid unnecessary waiting when an incoming call diverts to this line.
Hot Line: Check to direct the call automatically to a pre-configured destination without any action when the
FXS is off-hook. (ie. as the user picks up the phone). When the FXS is under Hot Line mode, no other
phone numbers can be dialed.
Hot Line No.: Enter the number for pre-defined destination.
Warm Line: Enter the time for the call to start with a pause, so the user can dial another number. The call
will be automatically directed to the pre-configured destination within timeout period.
VoIP Call Allow PSTN In: Check the box to allow an incoming waiting call from PSTN while VoIP call is in
use. To enable this feature, following settings need to be done first:
1. Tick VoIP Call Allow PSTN In to allow a waiting call from PSTN.
2. Tick Call Hold to hold the VoIP call when pressing the FLASH button on the phone set. (Calling
Feature → Call Hold).