User Manual

DVG-G5402SP User’s Manual ADVANCED
D-Link Systems, Inc. 42
2-2-3-6 Digit Map
Digit Map combines the original feature of Digit Map and Speed Dial. You can use “?” or “%” in the column
of Scan Code, VoIP Dial-out and PSTN Dial-out. “?” represents a single digit, and “%” represents a wildcard.
The function of the signs is to mapping the numbers between the number received from user and the
replaced or modified number for actual dial out. With this function, user can easily add certain leading digits
to replace a full set of numbers. There are 50 sets of leading digit entries to choose voice routing interface.
ADVANCED → VoIP → DIGIT MAP
Enable Pound Key ' # ' Function: Check the box to treat ‘ # ‘ as a digit and send out with other numbers
when dialing. If you un-check the box and ‘ # ‘ is pressed after dialing, it will speed up the phone number
detection of the gateway.
Default Call Route: Select VoIP or Deny as the default call route for the calls.
ADVANCED → VoIP → DIGIT MAP
Test Dial No.: You need to set a rule in the Digit Map Rule section first before entering the numbers for test
and display.
Result: It will show the numbers for VoIP Dial-out according to the Digit Map Rule as below.