User Manual

DVG-G5402SP User’s Manual SETUP
D-Link Systems, Inc. 20
2-1-3-4 Access Control
The Access Control setting provides a service that you can control different access rights for different
wireless clients connected to your Gateway. The local and remote stations are limited to access Internet
through your Access Points using MAC address of wireless client. Choose the appropriate Access Control
Services from Wireless Access Control Mode option.
Wireless Settings → Basic Settings
Disable: The Gateway does not response to any access rules. You are not allowed to make configuration
changes on this page.
Allow Listed: When Allow Listed is enabled, only those wireless clients whose MAC addresses are in the
Access Control List have rights to connect to your Access Point.
Deny Listed: When Deny Listed is enabled, only those wireless clients whose MAC addresses are in the
Access Control List will be blocked and restricted access to your Access Point.
MAC Address: Specify the MAC address which you want to allow/deny access your Access Point.
Comment: The space is reserved for comment or notation.