User Manual

DVG-G5402SP User’s Manual SETUP
D-Link Systems, Inc. 17
Wireless Settings → Security Settings (WEP)
Use 802.1x Authentication: Enable or disable using 802.1x Authentication.
Authentication RADIUS Server:
Port - Enter the port number of the authentication RADIUS server. Keep the default value: 1812 unless
the server required change to another number.
IP address - Enter the IP address of the authentication RADIUS server.
Password - Enter a password as the key of the communication between the authentication server and
the access point. The password of the access point must be the same with that of the authentication
sever.
WPA Authentication Mode
The wireless network can use WPA Authentication to verify whether a wireless device is allowed to access
your Access Point or not. You can choose to use Enterprise (RADIUS) method or Personal (Pre-Shared
Key). The encryption mechanism used for RADIUS and WPA-PSK is the same. The difference between the
two is that WPA-PSK uses a specific characters sting like password instead of a user-authentication.