User Manual

DVG-G5402SP User’s Manual SETUP
D-Link Systems, Inc. 13
2-1-3 Wireless Settings
This section instructs you how to setup your wireless network on the Gateway device.
Setup Hint:
1. Every device in the same wireless network must use the same SSID.
2. To avoid wireless network overlap, a specific and different channel is needed.
3. Make sure security used by every device in the same wireless network is compatible with the wireless
AP.
2-1-3-1 Basic Settings
Wireless Settings → Basic Settings
Enable Wireless LAN Interface: Enable wireless basic settings on LAN interface.
Band: The Gateway can operate in 2.4GHz ISM band with different speed of wireless connection, Select
the wireless band of your network.
2.4GHz (B) - Allow all 802.11B compliant wireless devices to associate with the wireless AP.
2.4HGz (G) - Allow all 802.11G compliant wireless devices to associate with the wireless AP.
2.4GHz (B+G) - Allow a mix of both IEEE802.11b and IEEE802.11g compliant wireless devices to
associate with the wireless AP.
Associated Clients: Click on Show Active Clients button, you can see all clients associated to the AP.
SSID: SSID is the name of your wireless network. All wireless-equipped devices share the same SSID to
communicate with each other. It must be unique to identify separated wireless network. For security, you
should change the default SSID to a special ID.
Channel Number: Select a clear and appropriate channel for your wireless network. A device on your
wireless network must use a specific channel to transmit and receive data. If wireless network has overlap,
change a different channel number.