User Manual

DVG-G5402SP User’s Manual SETUP
D-Link Systems, Inc. 12
IP Pool Starting Address: Enter the starting IP address for the DHCP server's IP assignment.
IP Pool Ending Address: Enter the ending IP address for the DHCP server's IP assignment.
IP Pool Uses Other Default Gw: Check the box to assign different default gateway for DHCP clients.
IP Pool Default Gateway: Enter the new default gateway that is different from LAN IP of the gateway.
IP Pool Subnet mask: Enter the new subnet mask.
Lease Time: Enter the length of time for the IP lease.
Domain Name Server Assignment: Select Auto or Manual to get the IP address of Domain Name Server
assigned by ISP or manually.
Domain Name Server IP: Enter the primary and secondary IP address of Domain Name Server if Domain
Name Server Assignment is Manual. Otherwise, the gateway will not be able to access hosts using
hostnames instead of IPs.
SETUP → LAN SETTINGS
Enable LAN QoS: Check the box to enable LAN QoS by Hardware.
Priority: Use the drop-down menu to select Low or High for the gateway to deliver the packets from LAN
interface when the packets arrive at the same time.
Flow Control: Check the box to limit incoming and outgoing rate if ticked.
Incoming Rate Limit: Use the drop-down menu to select the proper rate limit for the specific LAN port. The
flow is from LAN to WAN, and the rate limit can not exceed the real upstream bandwidth.
Outgoing Rate Limit: Use the drop-down menu to select the proper rate limit for the specific LAN port. The
flow is from WAN to LAN, and the rate limit can not exceed the real downstream bandwidth.