User Manual

DVG-G5402SP User’s Manual SETUP
D-Link Systems, Inc. 11
Factory Default MAC Address: The original MAC address of the gateway.
Your MAC Address: It is left blank as you log-in via the WAN port.
Current MAC Address: It shows the current MAC Address if you ever used the difference MAC address
from Factory Default MAC Address. You can click Clone to automatically copy the MAC address of the
Ethernet Card installed in the computer used to configure the device.
Note: This is only necessary to fill the field if required by your ISP.
2-1-2 LAN Settings
SETUP → LAN SETTINGS
LAN Interface Mode: Select the gateway serving as a Router with NAT or Bridge between WAN port and
LAN port without NAT.
Note: It is still accessible if LAN Interface Mode is Bridge.
SETUP → LAN SETTINGS
LAN IP / LAN default gateway: Enter the LAN IP address of the gateway. It is also the default gateway for
DHCP clients.
Subnet make: Enter the subnet mask for DHCP clients.
Enable DHCP Server: This variable is to assign the IP address for the devices connected to LAN port of
the gateway.