Quick Installation Guide DVG-N5402FF VoIP Wireless Router Check Your Package Contents DVG-N5402FF VoIP Router Phone Cord X 2 Ether Cable (CAT5 UTP) 12VDC, 2A Power Adapter Using a power adapter with a different voltage rating will damage this product and void the warranty.
Hardware Overview Front Panel Power：Solid indicates a connection to a good power source. Prov./Alm：A blinking light indicates the DVG-N5402FF can not register with SIP Server or can not get the IP address. A blinking light also indicates the DVG-N5402FF is attempting to connect with the Provisioning server. Once the service connects, the LED will turn off. The LED will light solid red if the self-test or boot-up fails. Reg.
Hardware Overview (continued) Rear Panel 1. 2. 3. 4. 5. 6. 7. 8. WiFi Switch: Turn on/off wireless LAN. Phone Port (1-2): Connect to your phones using standard phone cabling (RJ-11). USB: Connect to a 3G USB dungle or a printer.(This feature is optional.) LAN: Connect to your Ethernet enabled computers using Ethernet cabling. WAN: Connect to your broadband modem using an Ethernet cable. Ground: A conducting connection with the earth.
Hardware Overview (continued) 1. 2. 3. WPS: WPS button for wireless WPS-PBC setup method. Antenna: Connect to antenna for wireless network. Reset: Keep pressing 6 seconds to restore DVG to be factory default. Installing the Hardware A. Insert one end of the Ethernet cable into the Ethernet (LAN) port on the back panel of the DVG-N5402FF and the other end of the cable to an Ethernet Adapter or available Ethernet port on your computer. B.
Installing the Hardware (continued) B1. If the ISP provides optical WAN, insert SFP module into optical cage then insert optical patch code.and connect a switch. C. Insert a telephone cable into the Phone port, and then connect the cable to your telephone. D. Connect the power adapter to the power input at the back panel of the DVG-N5402FF and then plug the other end of the power adapter to a wall outlet or power strip then press power switch.
Installing the Hardware (continued) After the installations are completed, your network should look similar to the diagram below. Hardware configuration is complete! If your VoIP service is already activated, you can make phone calls now.
Configuration To access the web-based configuration utility, open a web browser such as Internet Explorer and enter the IP address of the DVG-N5402FF. Open your Web browser and type http://192.168.8.254 into the URL address box. Press the Enter or Return Key. Click Login to enter Web Site. Click Setup Wizard.
Configuration (continued) Click Next. The username of ADMIN and USER have been defined and locked by default. It is highly recommended to create a login password to keep your router secure. Click Next. Enter a NTP server or use the default server. Click Next.
Configuration (continued) Select your Internet connection type: DHCP – Most Cable ISPs or if you are connecting the DVG-N5402FF behind a router. Static IP – Select if your ISP supplied you with your IP settings. PPPoE – Most DSL ISPs. PPTP – Select if required by your ISP. WAN1 Domain Name Server – Select Manual to manually enter IP address of DNS or select Auto if DNS is assigned by ISP. Click Next. Register to the SIP Proxy Server by clicking Enable support of SIP Proxy Server.
Configuration (continued) Click on the Enable wireless LAN interface check box to build a wireless network. Enter the SSID to name your wireless network. All devices must have the same SSID to communicate on the wireless network. Select a wireless channel. Select the 802.11 Mode of your network which can work in different speed of wireless connection. Click Next. Select your wireless security modes for your wireless network. Click Next Setup is finished. Check the summary of your settings.
Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers within United States: D-Link Technical Support over the Telephone: (800)326-1688 D-Link Technical Support over the Internet: http://support.dlink.com email:support@dlink.
Ver. 1.
