User`s manual

DVG-G1402S User’s Manual
37
D-Link Systems, Inc.
Using the Configuration Utility (continued)
Using the Configuration Utility
IP Address:
Subnet Mask:
Gateway:
Interface:
Metric:
State:
Apply:
Advanced > Routing
Click Apply to save your settings.
Enter the IP address of the subnet or device where packets are
routed to.
Use Static Routing to specify a route used for data traffic within your WAN or LAN. This can be used
to specify that all packets destined for a particular subnet use a predetermined gateway.
Enter the subnet mask.
Enter the IP Address of the gateway used for traffic destined for
the specified subnet or device.
Select WAN or LAN.
Type in the maximum number of hops allowed for the static route.
Enable or disable the route.