User`s manual

DVG-G1402S User’s Manual

D-Link Systems, Inc.

Using the Conﬁguration Utility (continued)

Using the Conﬁguration Utility

Private IP:

Protocol Type:

Start Global Port:

End Global Port:

Start Local Port:

End Local Port:

Apply:

Enter the IP address of the computer you want to open port(s) to.

Select the protocol type:

TCP, UDP, or Both.

Advanced > Virtual Server

Click Apply to save your settings.

Enter the starting port you want to open. The global port is the

incoming (from the Internet) port.

Enter the ending port you want to open. If you want to open only

one port, enter the same port as the Starting

Global Port.

Enter the starting port you want to open. The local port is the port

used on your computer. In most cases, the

global and local ports

will be the same.

Enter the ending port you want to open. If you want to open only

one port, enter the same port as the Starting

Local Port.