User`s manual

DVG-G1402S User’s Manual

D-Link Systems, Inc.

Using the Conﬁguration Utility (continued)

Using the Conﬁguration Utility

Name:

State:

Start IP Address:

Gateway:

IP Range:

Leased Time:

Apply:

Enter a name for your DVG-G1402S unit (optional).

Select Enabled or Disabled. If you disable DHCP, you must

manually enter the IP settings on all your other network devices.

Home > DHCP

Click Apply to save your settings.

Enter the starting IP address of the IP address range you want to

assign to your network devices.

Enter the default gateway you want to assign to your devices. This

is usually the (LAN) IP address of the DVG-G1402S.

Enter the number of networking devices that will receive IP

addresses from the DVG-G1402S.

Enter the lease time. Enter 0 for no time limit.