User`s manual

DVG-G1402S User’s Manual
26
D-Link Systems, Inc.
Using the Configuration Utility (continued)
Using the Configuration Utility
User Name:
Password:
Retype Password:
Primary/Secondary DNS
Address:
PPPoE Status:
Connect/Disconnect:
Apply:
Enter your PPPoE user name.
Enter your PPPoE password.
Home > WAN > PPPoE
Enter your PPPoE password again.
You may enter the DNS if supplied by your ISP. Leave blank if you
do not know or were supplied with DNS server IP addresses.
The status of your connect will be displayed here.
Click
Connect to manually connect to your DSL service. You may
manually disconnect from your service by clicking
Disconnect.
Note: You must disable or uninstall the PPPoE software (Enternet 300, WinPoet, etc) from your
computer. You do not need the software since the router is authenticating to your DSL provider. The
software to connect to your service will not work through the router. Simply connect to the Internet
by opening your web browser.
Click Apply to save your settings.