User`s manual

DVG-G1402S User’s Manual
16
D-Link Systems, Inc.
Using the Configuration Utility (continued)
Using the Configuration Utility
If you selected Static, enter the IP address,
subnet mask, default gateway, and DNS
server(s) supplied by your ISP.
Click Next.
If you selected Dynamic, enter a host
name (optional) and click Clone MAC
Address.
Click Next.
If you selected PPPoE, enter your username
and password supplied by your ISP.
Click Next.
Note: You will no longer use the PPPoE software
that is installed on your computer. Make sure you
disable or uninstall the software.
Setup is finished. Click Restart to reboot the
DVG-G1402 router. Once the router is finished
rebooting, turn on your modem and allow up
to 2 minutes to connect to your ISP.
Click Restart.