User manual

DVG-6001G User Manual
44
D-Link Corporation.

SIP server Port
Local SIP listening socket, can choose the random or fixed. Random
is selecting a random port when start device. Fixed port can be
specified by customer. Default is 5060.
Is Register
DVG-6001G can work at two work mode: register and unregister.
Default is register mode.
Register
Interval
Registration time intervals of equipment to SIP server or outbound
proxy registration
.
T1 T1 timer of SIP protocol, default is 500ms
T2 T2 timer of SIP protocol, default is 4000ms
T4 T4 timer of SIP protocol, default is 5000ms.
TMAX
SIP compatibility configuration, after sending a SIP request, it is
overtime if had not received any response in the largest waitting time of
response retransmission. The largest waitting time of response
retransmission double after response retransmission.
Keep alive
Interval
Used for communication between device and SIP server and ensure the
state of equipment registered. Often use the factory default.
Enable 100rel
SIP compatibility configuration, Used when the news comes to send
100 to each other PRACK reply.
Refer-to Use
Target Contact
SIP compatibility configuration, fill in contact header in “Refer-to”
fieldof SIP message.
From Mode
when Caller
ID is Available
SIP compatibility configuration, FROM field used to transfer Caller ID.
Tel/User: From: caller number <sip:3001@IP>;tag=51088abb
User/User: From: 3001 <sip:3001@IP>;tag=51088abb
Tel/Tel: From: caller number <sip: caller number
@IP>;tag=51088abb
User/Tel: From: 3001 <sip: caller number @IP>;tag=51088abb
From Mode
SIP compatibility configuration, used for transmission ID when no Call