User manual
DVG-6001G User Manual
26
D-Link Corporation.
poor that has locked, signal will also automatically switch to
other stations.
Unlock Unlock the base station that has locked.
4.7 Routing Configuration
4.7.1 Routing Parameter
Figure 4-7-1 Rout Parameter
Table 4-7-1 Rout Parameter
Tel->IP Parameter Routing parameter from GSM to IP
Route calls before manipulation First routing, after number transformation
Route calls after manipulation
First number transformation, after routing
4.7.2 Tel->IP Routing
Figure 4-7-2 Tel ->IP Routing
Table 4-7-2 Tel ->IP Routing
Tel ->IP
Routing
This item uses to configure incoming call routes which can be used for
recieve the calls from the GSM.
Index It uniquely identifies a route. Its value is assigned globally, ranging from