DVG‐6001G User Manual v1.
DVG-6001G User Manual Contents 1. Equipment Introduction ............................................................................................................ 3 1.1 Overview ............................................................................................................................. 3 1.2 Application solutions ........................................................................................................... 3 1.3 Product appearance ...........................................
DVG-6001G User Manual 4.7 Routing Configuration ...................................................................................................... 26 4.7.1 Routing Parameter.................................................................................................. 26 4.7.2 Tel->IP Routing ...................................................................................................... 26 4.8 Manipulation Configuration .........................................................................
DVG-6001G User Manual 1. Equipment Introduction This chapter mainly introduces functions and structures of DVG‐6001G. 1.1 Overview DVG‐6001G is a full function GSM wireless gateway based on IP. It is able to offer stable network configuration, powerful function characteristics, excellent voice quality and provide affordable VoIP solutions for operators, enterprise, SOHO, home users.
DVG-6001G User Manual Figure 1‐2‐1 DVG‐6001G application solution 4 D-Link Corporation.
DVG-6001G User Manual 1.3 Product appearance Figure 1‐3‐1 DVG‐6001G View before and after Table 1‐3‐1 DVG‐6001G interface introduction Interface Discription When connecting normal the WAN indicator will flash, while not register, please check whether the network connection is normal firstly. WAN WAN used as a LAN under bridge mode. WAN port in transmits data at the same time the power is transmitted also, for this device provide DC power supply.
DVG-6001G User Manual GSM Destroy SIP account does not Fastly flash SIP account have registered have Green 1.4 Function characteristics 1.4.1 Protocol Standard SIP NAT PPPoE、HTTP、DHCP、DNS ITU‐T G.711a‐Law/μ‐Law、G.723.1、G.729AB; 1.4.
DVG-6001G User Manual EN61000‐3‐2: 2006, EN61000‐3‐3: 1995+A1: 2001+A2: 2005 EN55024: 1998+A1: 2001+A2: 2003 Certifications: FCC, CE 1.4.4 General Hardware Specification Power Supply：44‐57V, 550mA MAX Temperature: 0~40 （Operation）, ‐20~80 （storage） Humidity: 5%～90%RH Power Consumption: 6.5‐13W Dimensions: 120(W) x90(D) x24(H) mm Net weight: 0.8kg 2. Equipment Installation This chapter mainly introduces DVG‐6001G hardware installation and connection of equipment. 2.
DVG-6001G User Manual 2.2.3 Cable Connection of Equipment DVG‐6001G works in bridge mode: Figure 2‐2‐1 DVG‐6001G connection 3. Network Configuration In this chapter we will introduce the initial configuration of DVG‐6001G gateway. All of the network parameters of the gateway can be configured by IVR guidance. 3.1 Preparation Please ensure the following stepes are done properly before IVR setting: 1. Prepare an analog telephone or mobile phone 2. Make sure the gateway is connected with the network 3.
DVG-6001G User Manual 3.2 Attentions In each step, if user hears an IVR message of “setting successful”, which means that user has finished this step successfully. However, if user hears a “setting failed” message, please check redo theat step again. DVG‐6001G can work in bridge mode user should configure network parameters of WAN port. 3.3 General Feature Codes for System Setting Table 3‐3‐1 Feature codes for system setting Dial numbers Features *114# Play the phone NO.
DVG-6001G User Manual 3. Configure IP address: Dial the phone number of this SIM card, hear a message, enter "* 152 * 172 * 16 * 0 * 100 #" hang up when hear “setting successful" message; 4. configure subnet mask: Dial the SIM card phone number, enter "*153*255*255*0*0#" hang up when hear “setting successful" message; 5. Configure gateway: Dial the SIM card phone number, enter "*156*172*16*0*1#" hang up when hear “setting successful" message; 6.
DVG-6001G User Manual 4. WEB Configuration This charpter describes web configuration of DVG-6001G. 4.1 Preparing DVG-6001G connected to the local area network of PC used logged in with LAN. 4.2 WEB Landing Interface The default IP of DVG-6001G is 192.168.11.1/ 255.255.255.0. Also can modify equipment IP by IVR. Before landing please ensure that with equipment connected PC's IP address and the IP address of the equipment in the same subnet. Enter IP address of DVG-6001G in browser.
DVG-6001G User Manual 4.3 WEB Configuration DVG-6001G web configuration interface consists of the navigation tree and the detail configuration interfaces. Figure 4-3-1 Web introduce 4.4 System System information interface shows the basic information of system, Mobile information and SIP information. 12 D-Link Corporation.
DVG-6001G User Manual Figure 4-4-1 System Information 4.4.
DVG-6001G User Manual Port Numbers of ports of GSM Type The current type of network. Such as CDMA or GSM IMSI International Mobile Subscriber Identity, it is the uniquely identifies of SIM card Status Indicates the connection status of current GSM module Remaining Call Limite a call duration to the SIM card, when call duration is out of that Duration(min) duration, the call would be discontinued. This option shows remaining talk time. Carrier Display the network carrier of current SIM card.
DVG-6001G User Manual 4.5 Network Configuration 4.5.
DVG-6001G User Manual Addresses "Secondary DNS Server" 4.6 Mobile Configuration 4.6.1 Basic Configuration Figure 4-6-1Basic Configuration Table 4-6-1 Basic Configuration Dial Tone Gain It is the dial tone volume of call waiting, dial tone of mobile module when call out. Usually adopt the default configuration.
DVG-6001G User Manual API Server Port It is the remote channel No. who uses API. This is an option when selecting "Yes" under "remote API enable". The user can defined a not overlap with the other application port of the port number, the proposal value is 12000 API User ID Remote API user account. This is an option when selecting "Yes" under "remote API enable". API User password Remote API user password. This is an option when selecting "Yes" under "remote API enable".
DVG-6001G User Manual Figure 4-6-3 Mobile Configuration Table 4-6-2 Mobile Configutation Mobile Number Corresponding port SIM card number Enable Call Duration This function is to limit the max call duration of channel. Users can Limitation of single customize the SIM card on the single call duration; if more than call the duration, call will be take out stitches. If select “Yes”, then need to set the following two options.
DVG-6001G User Manual duration time allowed. Enable Call Duration This function is to limit the max call duration of channel. The max Limitation call duration is between 1 to 65535 minutes. Auto Reset Automatic reset talk time remaining, Let remaining call time is equal to the maximum call duration. Reset Period User defined daily, weekly or monthly reset SIM card information, that is, remaining call time is equal to the maximum call duration and start counting.
DVG-6001G User Manual Mobile Tx Gain Control IP to GSM side of call the gain. Default is 6dB. Mobile Rx Gain Control GSM to IP side of call the gain. Default is 6dB.User can adjust the two gain to adjust the size of the voice. Detect Reverse To GSM module is invalid, in the role of CDMA module, the local Polarity this function, use a overtime time to report a fake the extremely, CDMA network support open when the extremely.
DVG-6001G User Manual Figure 4-6-5 Change PIN Code PIN is Personal Identification Number of SIM card. Here the PIN code changed. Figure 4-6-6 PIN code to unlock When the PIN code three consecutively input error, system will tip input PUK yards, and reinstall new PIN code. Table 4-6-5 PIN code to unlock Select Port Select GSM port needed input PUK code PUK Code PIN Unlocking Key is the PIN code unlock code.
DVG-6001G User Manual 4.6.4 SMSC Figure 4-6-7 SMSC Mobile phone text message center, in theory the wireless module can automatically detect the SMS center number. But when wireless module can’t automatically detect the SMSC number, please contact mobile network operators, and manual Settings SMSC number. 4.6.
DVG-6001G User Manual Message The content of the messages, the length is not more than 300 characters. 4.6.6 USSD Figure 4-6-9 USSD USSD（Unstructured Supplementary Service Data）is a new type of based on GSM network interactive data business. When using a mobile phone keyboard input some prescribed number or symbols such as * #, etc, then press the dial-up key , mobile phone will send an instruction to network. According to instructions, network choice special services to you.
DVG-6001G User Manual 4.6.7 Carrier Figure 4-6-10 Carrier Table 4-6-7 Carrier Select Port Select a SIM card Select Mode There are automatic and manial two mode. Automatic mode can detect carrier automaticly; manual mode will select carrier from drap-dowm list. Carrier List Here will list all detected operators 4.6.8 BCCH Figure 4-6-11 BCCH 24 D-Link Corporation.
DVG-6001G User Manual Figure 4-6-12 BCCH Table 4-6-8 BCCH Description Refresh Interval Set BCCH parameters automatically refresh time Index Base station parameters numbers MCC Mobile Country Code, China is 460 MNC Mobile Network Code, used to distinguish between different network operators.
DVG-6001G User Manual poor that has locked, signal will also automatically switch to other stations. Unlock Unlock the base station that has locked. 4.7 Routing Configuration 4.7.1 Routing Parameter Figure 4-7-1 Rout Parameter Table 4-7-1 Rout Parameter Tel->IP Parameter Routing parameter from GSM to IP Route calls before manipulation First routing, after number transformation Route calls after manipulation First number transformation, after routing 4.7.
DVG-6001G User Manual 0 to 31. It describes the route for the ease of identification. Its value is character Description string When calling number matching the prefix, this routing will take effect. Source Prefix Any: indicates any number 0xxxx: All of the number of begin to 0 Destination Prefix Destination When callee number matching the prefix, this routing will take effect. Specify the specific IP, IP group and SIP Server Click “Add” or “Modify” enter the following interface.
DVG-6001G User Manual Figure 4-8-1 IP->Tel Destination Numbers Table 4-8-1 IP->Tel Destination Number Manipulation This option can modify the Lord called number pass by gateway It uniquely identifies a route. Its value is assigned globally, ranging Index from 0 to 31. It describes the route for the ease of identification. Its value is Description character string Source It specifies the source IP which will send the calls to gateway All the caller number must match the source prefix.
DVG-6001G User Manual Figure 4-8-2 IP->Tel Destination Number Add For example, source prefix is 0123, after transform, the prefix become 23. 4.8.2 Tel->IP Source Numbers Figure 4-8-3 Tel->IP Source Numbers Table 4-8-3 Tel->IP Source Numbers Index It is the number of the transformation and said number transformation rule label the priority. Value range is 0-31. It describes the route for the ease of identification. Its value is Description character string. 29 D-Link Corporation.
DVG-6001G User Manual All the caller number must match the source prefix. It specifies the source prefix allow to send call out Source Prefix Any: include anonymous, 0xxxx, 1[2-9]xxxx etc. 0xxxx: consist of some digits such as 015,08,09 1[3-8]6:consist of some prefix, include 136,146,156,166,176, 186 All the called number must match the destination prefix, the call prefix indicates the connected number Destination Prefix Any: include anonymous, 0xxxx, 1[2-9]xxxx etc.
DVG-6001G User Manual Figure 4-8-4 Tel->IP Source Numbers Add 4.8.3 Tel->IP Destination Numbers Figure 4-8-5 Tel->IP Destination Numbers 31 D-Link Corporation.
DVG-6001G User Manual Figure 4-8-6 Tel->IP Destination Numbers Add Please reference Tel->IP Source Numbers. Matching rules completely the same. 4.9 Option 4.9.1 IP->Tel Option Figure 4-9-1 IP->Tel Option Table 4-9-1 IP->Tel Option IP->Tel Operation This is an optional configuration items, when using the hotline, this item must be configured. Include: forbid call, call allowance, auto call, and password authentication. 32 D-Link Corporation.
DVG-6001G User Manual Index Number, value range from 0-31. It specifies the source IP which will send the calls to gateway Any: any IP address Source IP IP: specific an IP address IP Group: specific an IP group All the caller number must match the source prefix. It specifies the source prefix allow to send call out Source Prefix Any: include anonymous, 0xxxx, 1[2-9]xxxx etc.
DVG-6001G User Manual Figure 4-9-2 IP->Tel Operation Add For example: The above configuration said: Allow all calls from SIP server. 4.9.2 Tel->IP Operation Figure 4-9-3 Tel->IP Operation Table 4-9-2 Tel->IP Operation Index Number, value range from 0-31 All the caller number must match the source prefix. It specifies the source prefix allow to send call out Source Prefix Any: include anonymous, 0xxxx, 1[2-9]xxxx etc.
DVG-6001G User Manual All the called number must match the destination prefix, the call prefix indicates the connected number Destination Prefix Any: include anonymous, 0xxxx, 1[2-9]xxxx etc. 0xxxx: consist of some digits such as 015,08,09 1[3-8]6:consist of some prefix, include 136,146,156,166,176, 186 Its specifies number analysis rule Forbid call Operation Allow call Auto call Password authenticate It describes the route for the ease of identification.
DVG-6001G User Manual 4.10 IP Trunk 4.10.1 IP Trunk Figure 4-10-1 IP Trunk Table 4-10-1 IP Trunk IP Trunk Index When device connected to softswitch or SIP server, equipment and the soft switch exchange information through the IP trunk. Number, value range from 0-31 It describes the route for the ease of identification. Its value is character Description string IP To end the soft switch or SIP server IP Port To end the soft switch or SIP server port 36 D-Link Corporation.
DVG-6001G User Manual Figure 4-10-2 IP Trunk Modify For example, No.31 trunk to connect to SIP server of 172.16.100.103:5060. 4.10.2 IP Trunk Group Figure 4-10-3 IP Trunk Group Table 4-10-2 IP Trunk Group This configuration is optional, and is used to add the IP that have the same IP Trunk Group attributes to an IP group. The IP group will referenced by IP->Tel routing and number manipulation. Index Number, value range from 0-31 Description It describes the route for the ease of identification.
DVG-6001G User Manual For example, NO.31 trunk group has only one trunk NO.31, a trunk group can have multiple relay, a relay can only belong to a trunk group. 4.11 System Configuration 4.11.1 System Configuration Figure 4-11-1 System Configuration Network Time Protocol（NTP）is a protocol used to make computer time synchronization. It can make the computer to the server or clock source do synchronization, provide high precision accuracy of time correction. 38 D-Link Corporation.
DVG-6001G User Manual 4.11.2 Service Configuration Figure 4-11-2 Service Configuration Table 4-11-2 Service Configuration Real-time Transport Protocol details the standard packet LOCAL Start RTP format on the Internet to deliver audio and video. The initial PORT allocation of Channel when RTP voice stream transmit in the IP 39 D-Link Corporation.
DVG-6001G User Manual network. In general, using the factory default values. When there are multiple D-LINK series voice products, and the network gateway or router’s NAT with loopholes, user can try changing this item. Silence suppression technique to ensure that only wehn talking to both sides in call to take up bandwidth and improve the Enable Silence utilization rate of channel. Enable the "silence suppression" Suppression almost no impact on call quality, and can save about half of the bandwidth.
DVG-6001G User Manual extremely signal detection, then call send out after a few seconds delay to connect. When all the GSM port occupied, this function will switch the Redirect Call When All call toanother equipment and need to provide the device IP and Ports Busy port.
DVG-6001G User Manual Reject Anonymous Call The call from IP to PSTN will be rejected. from IP to PSTN General dial-up end of the logo has two kinds: 1. # operator Use # as END Key as dial-up end, 2. Waiting for a few seconds until dial-up overtime. No Answer Timeout Call in or out over a certain time no response, the call off. Bit of between the dialing time ,over the time will be seem as Interdigit Timeout end of dial.
DVG-6001G User Manual Figure 4-11-3 SIP Configuration Table 4-11-3 SIP Configuration SIP Proxy Outbound Proxy In SIP a proxy server realize voice over IP based on the exchange. SIP server address can be IP address, can also is a domain name. Outbound Proxy is ususlly used in network with firewall/NAT. Used for processing signal and help multimedia data pass through the firewall.
DVG-6001G User Manual Local SIP listening socket, can choose the random or fixed. Random SIP server Port is selecting a random port when start device. Fixed port can be specified by customer. Default is 5060. DVG-6001G can work at two work mode: register and unregister. Is Register Default is register mode. Register Registration time intervals of equipment to SIP server or outbound Interval proxy registration.
DVG-6001G User Manual when Caller ID Numbers FROM field. ID is Anonymous : Unavailable Username : From: ;tag=51088abb From: ;tag=51088abb Response way of IP to PSTN side, includes:Answered and Alerted. If select “Answered”, SIP protocol back to 200 news on the side hook; if Answer Mode select “Alerted”, SIP protocol back to 200 news on the side ringing. Usually keep default Settings. Reply 183 news after reply100 or ringback.
DVG-6001G User Manual Figure 4-11-5 Port Configuration Table 4-11-4 Port Configuration Current Port Choose the current registration port SIP User ID Used to SIP server registered the authentication, SIP registered account number is the phone part of users in SIP address, and is often used as an ID information callers, displayed in SIP software or phone on the LCD. The typical cases, SIP registered account number is a phone number or expanded the number, or a user name.
DVG-6001G User Manual 4.11.5 Digit Map Figure 4-11-6 Digit map Digit Map Syntax: 1. Supported objects Digit: A digit from "0" to "9". Timer: The symbol "T" matching a timer expiry. DTMF: A digit, a timer, or one of the symbols "A", "B", "C", "D", "#", or "*". 2. Range [] One or more DTMF symbols enclosed between square brackets ("[" and "]"), but only one can be selected. 3. Range () One or more expressions enclosed between round brackets ("(" and ")"), but only one can be selected. 4.
DVG-6001G User Manual 6. Wildcard x: matches any digit ("0" to "9"). 7. Modifiers .: Match 0 or more times. 8. Modifiers +: Match 1 or more times. 9. Modifiers ?: Match 0 or 1 times. Example: Assume we have the following digit maps: 1. xxxxxxx | x11 and a current dial string of "41". Given the input "1" the current dial string becomes "411". We have a partial match with "xxxxxxx", but a complete match with "x11", and hence we send "411" to the Call Agent. 2.
DVG-6001G User Manual 4.12 Tools 4.12.1 Firmware Upload Figure 4-12-1 Firmware Upload Please consult equipment provider before upgrading, select the appropriate firmware version. Click browse choose appropriate firmware, and then click upload. Uploading please don't shut off the power, otherwise lead to paralysis of equipment. 4.12.
DVG-6001G User Manual 4.12.3 Data Backup Figure 4-12-3 Data Backup When a device configuration is finished, please click data backup and saved the configuration file in reliable place. When the equipment malfunction or have other equipment needed to add, through the data restore function rapid configuration a function similar or the same equipment. 4.12.4 Data Restore Figure 4-12-4 Data Restore Importing backup data to equipment can save configuration time. Import will reboot.
DVG-6001G User Manual 4.12.5 Syslog Parameter Figure 4-12-5 Syslog Parameter Table 4-12-1 Syslog Parameter Server Address Syslog information will be saved in Syslog server. Fill in Syslog server IP. Syslog Level The information contained in the system logs are: NONE、 DEBUG、NOTICE、WARNING、ERROR. At present, only NONE and DEBUG level effective. Send CDR If choose CDR, Syslog level should be chosen NONE. 51 D-Link Corporation.
DVG-6001G User Manual 4.12.6 Login Password Figure 4-12-6 Username and Password The default WEB and TELNET user name/password is admin/admin,, if open the remote login please modify user name and password to prevent others to use the default user name and password to land. 4.12.7 Factory Reset Figure 4-12-7 Factory Reset Please use caution this operation, the operation will lead to all the parameters recovery factory state, including configuration parameters and network parameters.
DVG-6001G User Manual 4.12.8 Restart Figure 4-12-8 Restart By clicking on the restart can remote restart your device when recovery factory defaults, data recovery or modify system parameters need to restart equipment, please try to use the WEB to restart way to restart. 53 D-Link Corporation.
DVG-6001G User Manual 5.
