User`s manual

DVG-5121SP User’s Manual

D-Link Corporation

B Type (default) Setting

Call hold: Push the phone set flash hook one time to enable this function while holding a call.

Note: The flash hook pushing time can’t be longer than 1/2 second.

Three Way Conference: Set up a call, then push the phone set flash hook once.

Note: The flash hook pushing time can’t be longer than 1/2 second.

Call Waiting Cancel Code: Default *70

Forward Always Active Code: Default *72

Forward Always Deactive Code: Default *73

Forward Busy Active Code: Default *90

Forward Busy Deactive Code: Default *91

Forward Noanswer Active Code: Default *92

Forward Noanswer Deactive Code: Default *93

Do Not Disturb Active Code: Default *78

Do Not Disturb Deactive Code: Default *79

Call Return Code: Default *69

Anonymous Call/Block Caller ID (Per Call) Code: Default *67

Call Repeat/Call Back on Busy Active Code: Default *66

Call Repeat/Call Back on Busy Deactive Code: Default *86

Screen Last Incoming Call Code: Default *60

Call Pickup Code: Default *98

Pound Key (#): Select Enable or Disable.