User`s manual

DVG-5121SP User’s Manual

D-Link Corporation

Ping from WAN: While enabled, this allows pings from the WAN through the Internet to check if the device is

working or not.

MTU: You may need to change the MTU (Maximum Transmission Unit) for optimal performance with your specific

ISP. 1400 bytes is the default MTU.

IP Address: Enter the IP address provided by your ISP. (Static L2TP only)

Subnet Mask: Enter the subnet mask provided by your ISP. (Static L2TP only)

Gateway: Enter the gateway provided by your ISP. (Static L2TP only)

Server IP/Name: Enter the Server IP provided by your ISP (optional).

L2TP Account: Enter your L2TP account name.

L2TP Password: Enter your L2TP password and then retype the password in the next box.

Connect Type: Select either Keep Alive or Manual on.

Max Idle Time: Enter a maximum idle time during which the Internet connection is maintained during inactivity. To

disable this feature, select Keep Alive as the connect type.

Set DNS server: The default setting is “Automatically.” If you choose “Manually”, you must enter the Primary and

Secondary DNS server IP addresses assigned by your ISP.